Video of my blasters problems

[Blasting]

https://www.youtube.com/watch?v=1IRjUwI8QJw
Yeah I'm not feeling too good this morning..

 

[blasterBruce]

Good Start to your blaster ! , The leak is a Stuck float , A good carb cleaning should fix that , you have a Rear Hydro brake kit , Looks Like a Engingetics Like mine , Good kenda klaw tires too .

 

[mud runner]

dirty needle seat or float out of alighment or cracked float

 

[Blasting]

It looks like my front left tire needs to be replaced if you're looking from the rear. I'm gonna start working on this after Christmas and all. Then between new years and after.

 

[Blasting]

Good Start to your blaster ! , The leak is a Stuck float , A good carb cleaning should fix that , you have a Rear Hydro brake kit , Looks Like a Engingetics Like mine , Good kenda klaw tires too .

The quad was sitting two years and he told me it'd need a good carb cleaning.

 

[blasterBruce]

Check this Out ! , http://www.blasterforum.com/do-yourself-20/how-clean-your-carbureutor-254/

 

[Blasting]

Check this Out ! , http://www.blasterforum.com/do-yourself-20/how-clean-your-carbureutor-254/

Going to get the carb out before I leave for a party tonight so I can clean it when I get home I:I

No garage,cold shed.It's coming in my living room

 

[blasterBruce]

Going to get the carb out before I leave for a party tonight so I can clean it when I get home I:I

No garage,cold shed.It's coming in my living room

haha Sounds Good , Look under My Screen name , I built My Motor in my Living Room I:I

 

[Blasting]

Before I clean the carb, did I do this right? Haha sorry for my lack of experience..

 

[blasterBruce]

looks fine to me , And that Needle Is not Stock or Original

 

[Blasting]

looks fine to me , And that Needle Is not Stock or Original

Alright, thanks again for your help. I guess the guy did more than he told me.

 

[nboldman]

haha Sounds Good , Look under My Screen name , I built My Motor in my Living Room I:I

i did my top end in my kitchen. lol I:I

 

[blasterBruce]

Alright, thanks again for your help. I guess the guy did more than he told me.

It could have been the Owner before him , And No Problem , I'm here To learn And Help others as well !

 

[Blasting]

Here's my carb.. The fuel injector was disconnected before I even touched it.I don't really know why

 

[blasterBruce]

are you talking about that short black hose , that is your Oil injection inlet , do you premix the fuel and oil now ?

Edit : Also when you take the Bowl off , check your Main jet Nut under that piece of plastic and tell us the number !

 

[Blasting]

are you talking about that short black hose , that is your Oil injection inlet , do you premix the fuel and oil now ?

Yeah the black hose. I was watching a video about the carb and he said it was a fuel injector. The guy told me to pre mix the fuel and oil, I was thinking that's why it might be disconnected.

Should I clean the entire carb or just the bowl?

 

[scotj77]

rebuild kits typically come with a new needle and jets. but i prefer keeping the stock stuff in there if it doesn't look worn.

 

[blasterBruce]

That is the oil injection inlet , that inlet needs to be plugged off , otherwise it will suck in air , And anything else flying around , You need to check by the kick start side of motor , there is a cover with 4 bolts on it , that is where the Injection pump is , Need to check that !

 

[scotj77]

Yeah the black hose. I was watching a video about the carb and he said it was a fuel injector. The guy told me to pre mix the fuel and oil, I was thinking that's why it might be disconnected.

Should I clean the entire carb or just the bowl?

you need to cap off that hose. i would remove it completely and use a vacuume cap to seal it off. you will suck air through that hole causing your blaster to run lean. also need to read the mainjet size let us know what it is and what mods that quad has. that way we can help you jet it properly

 

[Blasting]

The quad was revving in neutral extremly high like full speed by itself today.. Is this the carb?