want to clear up some things

[89blaster89]

ok i just want to clear up a few things that ive heard.
will a shee rear axle fit on the blaster?
also will shee front shocks bolt right onto a blaster with no mods?
also will banshee rear shock bolt right on?
will 400ex rear shock bolt right on?

 

[speedemon17]

yes and yes!!!!!!!!!!!!

 

[motoman159]

ok i just want to clear up a few things that ive heard.
will a shee rear axle fit on the blaster?
also will shee front shocks bolt right onto a blaster with no mods?
also will banshee rear shock bolt right on?
will 400ex rear shock bolt right on?

axle will fit
shee fronts will fit
banshee will not fit
400ex will fit with ken oconnor bushings there about 25 bux

 

[brandoz28]

What year is your blaster? If it is 88-02 you will need the brake hub to make the axle fit

Otherwise the other guys have it covered

 

[speedemon17]

also ltz400 rear shocks will work and trx250r and drx400 and yfz450 shocks will fit

 

[89blaster89]

also ltz400 rear shocks will work and trx250r and drx400 and yfz450 shocks will fit

yfz 450 fronts bolt right on??

 

[motoman159]

yfz 450 fronts bolt right on??

no, you need long travel a arms

 

[mjgnslngr]

Yfz450 shocks are 16" long and stiff as a board compared to others.
Here, read this...
http://www.blasterforum.com/general-support-17/parts-will-fit-your-blaster-other-quads-24521/

 

[blasty 95]

Search button works wonders.

 

[blasterdemon7]

A Banahee axle will fit a Blaster. You will need the brake hub of your brakes are an older model then 03. The 400ex,Z400,250r and the 450 shock will work with the Ken O'Conner upper mounting bushings. You will have to drill the lower shock mount larger to 12mm or 15/32. The 450 shock will need one body mount cut off to make room for its offset rez .

 

[4cfed]

Cr125 rear shock fits to... but will sit a foot higher in the rear

 

[Triplecrown421]

yes these guys got it cleared up
i fell in that trap myself when buildin my mx style blasty. people saying a banshee axle is a bolt in, then when doing it i realized you need the brake hub aswell when installing onto a blaster 03 and older. other then that its slick and imo if you want width its the must

here is my fix to use the original blaster hub with banshee axle
http://www.blasterforum.com/suspension-14/banshee-axle-isnt-bolt-right-job-43369/

the ltz and pretty much all other good shocks need a custom set of bushings, i made myown but i hear kens are best altho when using ones with a piggy back rez it tends to bump the airbox lid. little plastic shaving dos the trick

 

[borednstreched]

89-90 suzuki lt250s shocks fit front and rear. they lower the quad about 1-2 inches.
the showa rear shock off of honda 200x, 350x, 250r all fit