The Ultimate Pipe test

[FLOTEK]

WHO DO YOU THINK BUILT AND DESIGNED THOSE RDZ PIPES
ROB STOLED THEM FROM HIM!!!!!!!!!!
Those Vito pipes were designed by Vito; I know this for a FACT!!!!!
JUST LIKE I KNOW ROB AT RDZ STOLE THAT PIPE DESIGN..............

okay okay geez we have al lheard this before ,thats story is as old as the hills and it depends on what pipe yo uare referring to ,i have owned al lthose mentioned and track tested them too ,love him or hate Rob builds some fast bikes and won planetsand

 

[Paulie B]

LOL FTZ racing SUCKS!
Stay away from them, their pipes are HORRIBLE!

FTZ Custom made my pipe and it's exactly what I needed and wanted.

 

[BlasterChris08]

Flotek clear ur pm's im tryin to pm you bro!!!

 

[FLOTEK]

Flotek clear ur pm's im tryin to pm you bro!!!

sorry ,taken care of .....

 

[Johnny Blaze]

does anyone know who designed the vito's blaster pipe? or who makes it. i know its vito's pipe but do they make it or does anyother pipe mfg make it

 

[BlasterChris08]

flotek i sent u a pm bout a port job! check ur messeges asap!!

 

[Agro2424]

i have another suggestion that i think would be pretty helpful. Could someone make a list of all the pipes that are made for the blaster that includes prices and such? it would really help people out to see all the prices right in front of them instead of having to research it. just a suggestion

 

[samolia]

if this turns out as good as i hope then i see someone getting alot of rep points in their future

 

[blaster20001]

did u do the test yet

 

[Kennedy_Power]

Hello Johnny_blaze
Vito designed the pipe, I personally know him. He is a great guy and is very engine smart.

 

[isrsan]

when will the test be done? because i was planning to buy a toomey. but I prefer to wait for the results and see.

 

[hickskateboarder]

he said he's gonna try to get to it this wknd

 

[Kennedy_Power]

Now after all this testing on the blaster, I know now I can hit 50hp on gas.
I changed a few things around that picked up huge power gains with a Shearer custom pipe. I should be able post all the data by Tuesday.

 

[newnick]

I'm hoping you'll post the torque #'s as well as hp.

 

[wrench man]

Do you want to see the results with a stock cylinder or would you rather have me do a bad ass trail port to test each pipe? I will begin this project this week.
Let me know!

The stock porting and a FMF Fatty makes a GOOD trail setup, don't tell it doesn't!, I can come off of a corner in third gear and hammer the throttle and if I'm not up on the front of the seat I can lift the front tires, it was HORRIBLE! until I put the +4" swing arm on there!

How about a "DUNE" port with one of those pipes that isn't as "sh*tTY" as my FMF Fatty! I could use a little more power for hill climbing.

 

[89custom]

how did you get 50hp? with what setup? could i get 50hp with a good port job, my big bore and my dynoport? ive got pleanty of airflow, pb airbox, 36mm carb and vf3 reeds so thats not restricted.

 

[B14573r]

no u couldnt, thats a drag only blaster im betting, with a drag pipe and extreme port job

 

[ruthless_one3k]

AHHHH the anticipation is killing me

 

[Kennedy_Power]

HI 89custom
Take that dyno port and off your bike and chop it up on a band saw, that pipe will not the power...
Sorry man to tell you this, but if you want 50hp to 52 on gas you got to get the right pipe, and all the right stuff


I am still testing some pipes; I will show lots of on Monday for sure
I will post a FMF pipe next to a Shearer Custom Pipe in the next few minutes
on a banshee motor thats stock cylinders. Then you will see why FMF SUCK!!!!!Flickr: kennedy_power's Photostream

 

[ron89]

you like the paul turner pipe, jw how it would perform with a trail port??..