Radiator dimensions?

[BJMPowersports]

I am currently swapping a WR250 2 Stroke in my blaster and i am needing to decide on a radiator. I see most seem to prefer the Kawasaki Mojave Radiator, but could anyone who used it or has one measure it for me? Or possibly a YFZ450 Radiator? My pipe mounts a bit differently then every one i have seen and am unsure i have the clearance for one of them, if not i will just run one dirtbike radiator sideways...

Ben

 

[YZ Otis]

Approximant measurements ... thickness was at widest spot, end cap seams.

Mojave: Marginal cooling for a YZ250
Height .... 8"
Width .. 15 1/4"
thick ..... 2"

Polaris Predator: haven't tried it, but would like to
Height .... 8 1/2"
Width ... 15" ... wider if you include the overflow bottle but that could be mounted elsewhere.
Thick ... 1 3/4" .... 2 3/8 w/rock guard
fan is about 1 5/8" X 7" dia.

With the poor resale value of Polaris products, there are a lot of quality parts out there at fair prices for the scrounger

I believe one bike radiator will be insufficient, but I could be wrong.

3Wh33l3r Rid3r can prolly give ya the dimensions on the YFZ radiator

Good Luck

 

[BJMPowersports]

Thanks! Exactly what I was looking for, as for running 1 radiator, it would have been a temporary last resort lol. Judging by your measurements I can squeeze in either one of the two, the Mojave is cheaper by a couple bucks but I like how the fittings are opposite in the Polaris one, and I think I will end up going that route, I have made an offer on eBay for one, so we will see where it goes.

Ben