Colt 45 Brains

wilder11354

New Member
Mar 9, 2012
28
1
0
Montrose, Pa
anyone that drinks that gut rot shouldn't be allowed to handle a screwdriver and hammer, especially at the same time. X(
Trying to get a new bearing kit in swingarm, well old bearings failed, 45 fix it, git a piece a pipe floyd and we will drive it n an mek er work!! GULP, GULP... guud tinking elmer!!! Thats how Grand kids dad bought this blaster. Got crap out of one side, carefully, other side needs to be pressed and hopefully it ALL comes out.

If not anyone got a stock swingarm, 2001 blaster for sale CHEAP!! No i don't touch 45, figure if you got longer one won't really be needing stock one.
 
That didn't make any sense....all I got out of that was that the old swingarm is sh*t and you need a new one. WTF is 45?
 
anyone that drinks that gut rot shouldn't be allowed to handle a screwdriver and hammer, especially at the same time. X(
Trying to get a new bearing kit in swingarm, well old bearings failed, 45 fix it, git a piece a pipe floyd and we will drive it n an mek er work!! GULP, GULP... guud tinking elmer!!! Thats how Grand kids dad bought this blaster. Got crap out of one side, carefully, other side needs to be pressed and hopefully it ALL comes out.

If not anyone got a stock swingarm, 2001 blaster for sale CHEAP!! No i don't touch 45, figure if you got longer one won't really be needing stock one.

Colt 45 CHEAP beer, Cheap people,45 drinkers, that put section of pipe in worn out bearings, and say its better than new parts. Alcohol does kill brain cells.
All came out of arm fine, need to run brake cylinder hone thru them a little to clean it up, put sleeve locker(loctite) on new bearing shells and press them in. Then put swingarm and rear axle assembly back in frame. Then... front brake rehab, bet that will be a fun one. :D
 
Colt 45 CHEAP beer, Cheap people,45 drinkers, that put section of pipe in worn out bearings, and say its better than new parts. Alcohol does kill brain cells.
All came out of arm fine, need to run brake cylinder hone thru them a little to clean it up, put sleeve locker(loctite) on new bearing shells and press them in. Then put swingarm and rear axle assembly back in frame. Then... front brake rehab, bet that will be a fun one. :D

lol glad its working out, u live in montrose huh? i lived in choconut up untill june
 
LOL ... makes me feel almost literate ... I'm missing a few grey cells so the pipe idea is kinda inspiring ... I'm going to try it ... replace those tiny instarust needle bearings with nice long old fashion bronze bushings & grease zerks ... thanks for the thought ... burp!
 
Colt 45 CHEAP beer, Cheap people,45 drinkers, that put section of pipe in worn out bearings, and say its better than new parts. Alcohol does kill brain cells.
All came out of arm fine, need to run brake cylinder hone thru them a little to clean it up, put sleeve locker(loctite) on new bearing shells and press them in. Then put swingarm and rear axle assembly back in frame. Then... front brake rehab, bet that will be a fun one. :D

The peice of pipe youre speaking of belongs in there its supposed to be there that was some half assed backwoods fix.

Put it back or suffer the consequences...