Rear end lifter (for lubricating chain, etc)

killerke

Member
Oct 2, 2014
28
8
44
33
flanders, belgium
Hello,

I put something together
I tought it would be good to share it with you guys.

20141105_190032[1].jpg


20141105_190038[1].jpg


Just slide it under, press it down with your footh and pull the grabbar ;)
simple as that , i made it with some scrap tubing

greetz
 
That is a neat little device, top marks.

Be wary as the skid protection is a little flimsy, it does pay to help the lift with the grab bar!
 
That is a neat little device, top marks.

Be wary as the skid protection is a little flimsy, it does pay to help the lift with the grab bar!

Thanks, yes it is easier to lift it when you pull the grabbar.

I'm gonna look for making 1 for the front also.

And if you take a bigger tube that is welded to the base, drill a hole in it, and then a tube that slides in and drill some more holes, you can make it adjustable xD ;)
 
for the front on a stock blaster would be easy.

if you ever give/sell them, you would have to keep in mind aftermarket setups like mine have suspension travel of at least 6 inches before the tires come off the ground