ok iv decided to let yall choose what color im gonna do my blaster im trying to make it look as slow as possible and when i beat the other bikes i want them to say how did i get beat by this piece of crapi
Last edited:
mud runners beater/sleeper rebuild
- Thread starter mud runner
- Start date
what color a arms should i do and you need to vote for the plastic too
Last edited:
make sure you do zero prep work for the paint, maybe drip some oil in spots and wipe it off...use the crappies paint you can get at home depot, quickcolor
make sure to overspray onto the frame axle and tires
get a mangled rusted stock front bumper and just use the sape paint to cover the rust again with zero prep
the idea is to have paint chipping off all over
dont forget to paint the top half of the chain
get some good runs in the paint
and stickers, omg stickers anything will do, holley carb, edelbrock, jegs, sunoco, walmart, target, band promo sh*t, fukin any godamn sticker you can find must go on it...maybe even some my little pony and dora stickers from wallmart
your gonna need a custom bent handlebar setup, mount your bars in the clamp and use a long pole to tweak them downward (the same on both sides so its still strait)
steel rims with beads that have been to awks mountain
no rear grab bar
no headlight
wires hanging out with cut ends, no run/light switch, no key
if you have a nice bent stock grab bar ziptie a milkcrate to it
no nerfs no heal guards
no petcock handle (or broken off tab)
gaudy ass valve stem caps from pepboys
rattle can the rims black with yellow spirals, make the spirals spin in diff directions
rattle can red the seat cover too (this will chip nice)
blue handlebars on a red bike
duct tape grips
make sure your exhaust has some miles on it, find a nice grungy used dg or fmf, +1 for "speed dents"
no and i mean absolutely no packing in the rusted ass silencer
1 lug nut missing from each rim
i could keep goin but you get the idea
make sure to overspray onto the frame axle and tires
get a mangled rusted stock front bumper and just use the sape paint to cover the rust again with zero prep
the idea is to have paint chipping off all over
dont forget to paint the top half of the chain
get some good runs in the paint
and stickers, omg stickers anything will do, holley carb, edelbrock, jegs, sunoco, walmart, target, band promo sh*t, fukin any godamn sticker you can find must go on it...maybe even some my little pony and dora stickers from wallmart
your gonna need a custom bent handlebar setup, mount your bars in the clamp and use a long pole to tweak them downward (the same on both sides so its still strait)
steel rims with beads that have been to awks mountain
no rear grab bar
no headlight
wires hanging out with cut ends, no run/light switch, no key
if you have a nice bent stock grab bar ziptie a milkcrate to it
no nerfs no heal guards
no petcock handle (or broken off tab)
gaudy ass valve stem caps from pepboys
rattle can the rims black with yellow spirals, make the spirals spin in diff directions
rattle can red the seat cover too (this will chip nice)
blue handlebars on a red bike
duct tape grips
make sure your exhaust has some miles on it, find a nice grungy used dg or fmf, +1 for "speed dents"
no and i mean absolutely no packing in the rusted ass silencer
1 lug nut missing from each rim
i could keep goin but you get the idea
rember that im gonna be raceing this bike and have to have nerfs and all 4 lugnuts but i think i will paint the frame 99c black but will no packing in the dg i have now make it louder
perfect, now to get that custom paint flake goin, actually paint over the ziptied cracked rear plastics
ooo i forgot one, mechanics wire to replace exhaust bolts and the clamps between pipe silencer
dont forget rust stains
dont forget rust stains
i painted over neon green zipties on the frame i have now but the motor its going in a diffrent frame
if you start winning start aa trend, something like i owe it all to freshly painting the inside of my airbox before a race, the fumes give me the edge i need
