DuraBlend 4T 20W-50 - Four-Stroke - Product information - Valvoline
I this is the oil then it is suitable for wet clutches.
Being 50 grade could have posed some problems with a Blaster clutch.
The wording "extreme pressure additives " could indicate friction modifiers without actually coming right out and saying it ...
I agree, but it specifically says "for motorcycles with wet clutches". I would think that would me no incorrect additives. Heck I don't know, just trying to determine the cause of the SUDDEN clutch slippage. Also, when the clutch is pulled in, the transmission in gear, and you rev the throttle, the bike moves forward..... and inch or so. BUT, the clutch does not start to engage until the clutch handle is release about 1/2 to 3/4 of an inch from the grip.
Will it hurt to use Lucas TV zinc plus to break in complete rebuildDuraBlend 4T 20W-50 - Four-Stroke - Product information - Valvoline
I this is the oil then it is suitable for wet clutches.
Being 50 grade could have posed some problems with a Blaster clutch.