Atv flags

[shadetreeatv]

Ok guys an gals when u bye a atv flag ride around and all the sudden the flag comes out of it's holder now what...i have tried verios stuff to re glue it what do u use to re-atach your flag to it's holder

 

[blasterdude14]

a sh*t load of duct tape and super glue should work, maybe throw a piece of gum in there as well

 

[HawaiianBassHed]

some 2 part epoxy maybe? it looks like metal joining to plastic?

 

[justtwistit]

i would just forget the holder and duct tape that thing to the rack! and then when u think its good and on there put some more duct tape just to make sure!

 

[YZ Otis]

Take that mount apart. Should just crimp the flag pole so you can put it back in after you shear it off .. .. least that's how all ours are

 

[yzrider]

well, to reatache mine, i use tire repair rubber cement, haha, it worked

 

[98blaster+4]

at work (snowmobile tours) we use flags on all our touring sleds and they break a lot, they cost us 9 bucks and they are not really fixable. but you could use a drill and drill out the mounting bolt and slide the flagpole down in there and use some cable crimps on top and bottom of the bolt to hold it in good. OR get another flag, if you get one with a spring at the mounting point they will last forever

 

[fioz600r]

Take that mount apart. Should just crimp the flag pole so you can put it back in after you shear it off .. .. least that's how all ours are

Thats how mine works also..........

Its been broke and removed the mount and got the broken part out and slid the end back down in the mount....