weird throttle issue

[super noober]

ok, so you know that little bit of freeplay in the throttle cable before you feel the drag of the slide opening? well that for some reason affects my RPM's???? i dont understand how it can, the slide is not moveing. BUT sure enough it does, also the bike wont idle at all and i just cleaned the carb, pilot, new 250 main, all that good stuff.... any ideas guys? oh yeah and the bike absolutely riiips it just will not idle and that freeplay affecting my rmps is fcking with me...

 

[blasters/banshees]

ur cable is probley has nic's in it so it sticks alittle mine does that to......u need a new throttle cable

 

[super noober]

ur cable is probley has nic's in it so it sticks alittle mine does that to......u need a new throttle cable

its brand spankin new, thanks for the thought though.

 

[03blasteryfs03]

to tight at the adjuster??

 

[Ready2rev]

have you tryed adjusting the idle screw, thats located on top of the tors unit?

 

[super noober]

yeah ive tried all that^^^^ its really buggin me.

 

[03blasteryfs03]

the carb clean burning or try a new plug? air filter new??

 

[Ready2rev]

so you adjusted both the idle screw and the handlebar throttle adjustment? try turning the idle screw all the way clockwise then tighten the handlebar throttle adjustment all the way in. the idea is that you want your carb slide to be raised a little bit or it will not want to idle.

 

[03blasteryfs03]

or the airscrew was vibrated loose turn it in until idles good

 

[super noober]

carb is sparkling clean, yeah i adjusted both, air screw is 2 turns out 1.5 and 1.75 out had the same results. its just crazy, the blasty has tons of power (for a blasty) but it immediately dies when you try to stop. what do you make of the freeplay messing with my RPM's? like if i move the thumb lever that little bit of slack before your slide starts lifting actually makes my RPM's go up.... i dont understand how it does if the slide is not moving then what the hell???!!??

 

[03blasteryfs03]

its to tight is the cable bound or cought on the coil like around the back of coil it needs to have slack or free play

 

[super noober]

its to tight is the cable bound or cought on the coil like around the back of coil it needs to have slack or free play

nope its not tight all, i dont get it.. thanks for trying though guys!! i appreciate the ideas. I:I

 

[03blasteryfs03]

take the slide out and take some FINE FINE SAND paper and go around it LIGHTLY the stick it in well blow it off first

 

[blasterfreek30]

noob is the tor and the parking brake removed.....theres no way it should rev up if that slide is not moving...thats why it seems to mabe be electrical........or there is a airleak somwhere

 

[super noober]

noob is the tor and the parking brake removed.....theres no way it should rev up if that slide is not moving...thats why it seems to mabe be electrical........or there is a airleak somwhere

the tors is, i guess that would be the next thing to try. are ya getting what im saying with the free play making my RPM's move? also a possible tore issue?

 

[blasterfreek30]

yea there is that tiny bit of play in the thumb throttle before it actually starts to move the slide...but as long as that slide is not moving it should not be reving up....did this just start outta nowhere......or did u put something back together and then it did this???

 

[super noober]

yea there is that tiny bit of play in the thumb throttle before it actually starts to move the slide...but as long as that slide is not moving it should not be reving up....did this just start outta nowhere......or did u put something back together and then it did this???

you da man freek, thats exactly what im talking about. yeah i put a new throttle cable on.

 

[blasterfreek30]

if this just started after u put a new cable on then i would take the cable out and doulble check it for any flaws or cracks....take it out of the top of the slide and just reinstall it......mabe something was hanging up or binding up....really weird syptoms lol

 

[super noober]

if this just started after u put a new cable on then i would take the cable out and doulble check it for any flaws or cracks....take it out of the top of the slide and just reinstall it......mabe something was hanging up or binding up....really weird syptoms lol

oooo-right man will do, ill also take the tors off . thanks guys!! I:I

 

[BLASTER POWER]

yeah id take the tors off give it a try.... i had a similar problem with mine i disconnected the tors and it worked no problem!