Hi everyone, I am new here, and new to ATVs. I was given a '93 Blaster, pretty much complete, expect it was missing a few things (fenders, and handlebars) and it had been sitting outside for about 3years.
I have already rebuilt the engine, and I tore apart the entire body/ frame. I found that it needs new cables (throttle cable, brake cables), along with a chain and both sprockets. Also need rear bearings, seals, and also need front brakes.
I think its a good project - so far I have stripped the frame, primed it, hit the frame with flat black paint, then hit it with a coat of clear. I attached some pictures of the frame. I hope to have the a-arms done by the end of the week (its supposed to be poor weather this week).
Picture of the frame before any prep work.
Frame partially painted with flat black.
Frame hit with one coat of clear.
I have already rebuilt the engine, and I tore apart the entire body/ frame. I found that it needs new cables (throttle cable, brake cables), along with a chain and both sprockets. Also need rear bearings, seals, and also need front brakes.
I think its a good project - so far I have stripped the frame, primed it, hit the frame with flat black paint, then hit it with a coat of clear. I attached some pictures of the frame. I hope to have the a-arms done by the end of the week (its supposed to be poor weather this week).
Picture of the frame before any prep work.
Frame partially painted with flat black.
Frame hit with one coat of clear.