Trail ride Blasters (only) Post your Pictures and Specs.

[zmaro]

mods in sig, in addition: new rockstar grips

 

[yanu92]

I:I

 

[86_Notch]

Mine's pretty much a stock 89 that the previous owner claims he'd just rebuilt it. I bumped the timing 4 degrees, added a hyd rear brake setup courtesy of awk ( thanks again ) added an fmf sst pipe and jetted the stock carb up. I also did some painting and fender slicing .

Before

After

 

[blastermaster94]

engine
bored .20 over
wiseco piston
uni filter

body
stock

suspension
stock

 

[yzrider]

i'll have new pics soon

i don't wanna name the mods, but u can prolly see most of em.....

 

[05blaster3]

i'll have new pics soon

i don't wanna name the mods, but u can prolly see most of em.....

what kind of lights are those and how did you mount them???

 

[05blaster3]

all stock except the handlebars, nerf bars, and bumper lol
http://sphotos.xx.fbcdn.net/hphotos...00662_100000512537141_1530110_751398871_n.jpg

 

[turbobird]

This ones my wifes. Went from stock this to this.

 

[wwholden]

This ones my wifes. Went from stock this to this.

Beautiful bike!!!!! Im going to do the same color scheme. Anyone know where I can get decals like his?

 

[turbobird]

Hey your from Dayton Also! Im down in springboro/centerville area.

 

[slickerthanyou]

This ones my wifes. Went from stock this to this.

[/qoute]

I sure wish my plastics looked like that! beautiful! I:I

 

[Paulie B]

Chassis | Suspension | Controls:

A Arms: ASR +3 up 1
Swingarm: Swingarm shop +4 Powder coated silver
Steering Stem: Stock
Axle: Polished stock
Carrier: Stock
Locknut: Polished stock
Hubs F|R: Stock
Bars: Powder coated stock
Throttle/Clutch Lever: Magnum EZ pull
Grips: Scott Hurricane
Bumper: DG
Grab Bar: Custom +2
Pegs: Custom double wides w/kick-ups
Front Shocks: 06' YFZ450
Rear Shock: 06' Stock
Brake Line: Stainless
R Brake : 03' CBR600RR
R Rotor : 03' CBR600RR
Rims F|R: DWT .160
Tires F|R: F/ 22" Maxxis front pro's R/ 20" Kenda Dominators

Body:

Frame: Stock, modded to fit the motor
Plastic: Maier
Graphics|Seat Cover: 79' YZ400 w/ Hurricane Hannah bolts! / stock seat
Bar Pad: 79' YZ400
Fuel Tank: Stock

Engine|Drive System:

Cylinder|Head: Flotek ported. Milled / rechambered head w/o-ring groove
Bore & Stroke: 83mm x 75mm
Displacement: 406cc
Cam: R U serious?
Carburetor: Polished Keihin 38mm air stryker RDZ meth converted w/billet oversize bowl and powerjetted
Air Filter|Box: K&N w/outerwears cover / CFM airbox
Pipe|Silencer: Trail- YZ400 DG pipe. Quadzilla FMF silencer. Drag- Custom FTZ Racing out of frame pipe
Clutch|Plates: Flotek pro-lock Banshee clutch w/Banshee TZ bearing mod on the pusher
Gearing F|R: 15/40
CDI|Ignition|Killswitch: YZ400 CDI/ Nology coil and hot wire/ Tusk tether kill
Reeds: Custom Mototasinari V-Force 3's
Cooling: AIR

 

[wwholden]

Your ^^^ jug looks huge!! Is that still a stock jug borded out that much or a completely different one?

 

[wwholden]

Hey your from Dayton Also! Im down in springboro/centerville area.

Yeah Im from the Centerville area too. We should go riding sometime. Pm me

 

[super noober]

Your ^^^ jug looks huge!! Is that still a stock jug borded out that much or a completely different one?

its a yz400 motor.. I:I

heres my trail bike, FLOTEK ported Airsal BBK running on 110 octane with +8* advance and 180+lbs compression

 

[Blaner]

My cousins 2006 Blaster.

Ported stock bore.
Boyeson Dual stages
FMF SST
Works Dual rate shocks

And some other stuff I cant remember.....

 

[YZ Otis]

Specs:
Just plain ugly, steel bark bittin wheels, rusty FMF, vitos 240, pj34 & about 30' off course
~

 

[Paulie B]

Your ^^^ jug looks huge!! Is that still a stock jug borded out that much or a completely different one?

All those words before the pics, read them

 

[wwholden]

All those words before the pics, read them

I can read lol.... Didnt see anything about a completly different engine. But after looking at the botom end it is definatly not a blaster engine.

 

[xKroniK13x]

I can read lol.... Didnt see anything about a completly different engine. But after looking at the botom end it is definatly not a blaster engine.

It's a YZ400 engine - hence the YZ400 DG pipe, CDI, and graphics