I have found out so much about my Blaster over the last few days that I was lied to about its not funny. First off its a 95, not a 96 like he said. I was told the engine had a stroker crank, bored .030 over, head milled .030, port job etc. Well I pulled the head today to find its only been bored over, cylinder looks good though. But nothing else he said was done. He told me all the front and rear wheel bearings were replaced and swing arm bushings, also a lie. The front right wheel bearings are loose. I was told the rear brakes didn't work and it only needed pads to find a gutted brake caliper when I took it apart. The wheel nuts were put on so tight we had to cut one off with a torch. But whatever, he will get his.
Edit, I do realize most of it is my fault as I should have really checked it over better and pulled the head in front of him. Just ranting cause you can't trust anyone now a days.
Edit, I do realize most of it is my fault as I should have really checked it over better and pulled the head in front of him. Just ranting cause you can't trust anyone now a days.