Setting up for MX Racing come look need your opinion

Oct 16, 2008
1,706
9
43
southern IN
i bought me some hyrdrualic brakes they are banshee ones soanyone know how to mount them and i got everything for the whole rear setup of brakes

and i just got some nerf pars pro aluminum pro pegs soon to be here

and i am looking for a tether kill switch so i can race

what else would be nice to get under $200 total
 
Last edited:
under 200,for mx, how bout a nice used 250r rear shock and for fronts i rly dont know, suspension rly matters in mx, OH some good rubber is important!!!
 
suspension is big if your going to be racing, but so is traction so tires are big too... but if your good in those departments then i'd go for some port work
 
Mounting banshee brakes is a pain. first you have to ream the hole for the ball joint to fit then you need to either drill and tap the spindle so you can add set screws to hold the ball joint in place, or weld it in place. You could also just get A/M A-arms that use the banshee style ball joints. (the kind with the castle nut, the blaster uses a pinch bolt). Another very expensive unless you can find a cheap set on e-bay (good luck with that) option is to use 03+ blaster spindles.
 
come on i am looking into reeds 400ex rear shock, and some wp racing front shocks the frontsd are set for about a 180 pound rider and im 145 area how good would they still work
thanks
 
Are the wp shocks adjustable? comp/rebound? If there adjustable then you should be able to get them dialed in to your liking even if there valved for a heavier rider.