seadoo oil

it's probably not worth trying it..but honestly im sure it's fine...every 2 stroke motor in my opinion and for what i've seen and worked on will run on any 2 stroke oil...but usually your just def desperate and for the lil money it is for some good reliable 2 stroke oil...by it lol
 
absolutely you can, that would be very comparable to Yamalube, sea-doo runs their engines hard and all manufacturers look to lube their rods and crank bearings about the same, I wouldn't pre-mix it but if you have the injector still on go ahead.
 
well im running snowmobil oil in mine and it works fine cause thats all thay had at oreillys
 
well im running snowmobil oil in mine and it works fine cause thats all thay had at oreillys

Im pretty sure it would be fine but its gonna be a fresh rebuild so i dont necessarily want to put it in the system. Im either going with Amsoil Interceptor or Bel- Ray MC-1 Racing oil. When i first got the bike, it was running on Castrol Grand Prix oil and that stuff just fowled out my plugs even a 40:1!
 
get klotz supertechnaplate or castor 927 ,worst oil for a 2 stroke is that amsoil junk
 
oil is oil. use it. check to see if it has any protective additives like against moisture and salts. i use stihl high performance chainsaw oil in mine. runs like a champ!
 
I have never had a builder recommend Amsiol for a 2-stroke. The funny thing is that many of them use Amsoil in their cars and trucks. I had one builder tell specifically not to use it for my Blaster while he was showing me his Amsoil bypass oil filtering system on his Duramax Diesel that he uses Amsoil oil in. This made me think that he is not against Amsoil but what he says about the product may be true- in applications for two-strokes. Also, I have not come across one builder that recommends a 50:1 ratio for any air-cooled two-stroke motorcycle or atv. I imagine that there are some out there that do but I have yet to meet them. I do believe that if you like it run it- and live with the results.....I:I
 
I have never had a builder recommend Amsiol for a 2-stroke. The funny thing is that many of them use Amsoil in their cars and trucks. I had one builder tell specifically not to use it for my Blaster while he was showing me his Amsoil bypass oil filtering system on his Duramax Diesel that he uses Amsoil oil in. This made me think that he is not against Amsoil but what he says about the product may be true- in applications for two-strokes. Also, I have not come across one builder that recommends a 50:1 ratio for any air-cooled two-stroke motorcycle or atv. I imagine that there are some out there that do but I have yet to meet them. I do believe that if you like it run it- and live with the results.....I:I


What my dealer said was that you can run 32:1 ratio with Interceptor ONLY! Dominator is so thin that when you mix it, its almost like gas.
 
i personally run amsoil in every 2 stroke i own.. and i lean on them HARD.. never an issue.. klotz is good stuff too.. but amsoil is FAR from junk