Long wait on them caps huh?
I hope she sparks now. Fingers crossed. I guess that's all you can do.
Rebuild on the "FREE SHEE"
- Thread starter Wifesblaster
- Start date
Long wait on them caps huh?
I hope she sparks now. Fingers crossed. I guess that's all you can do.
I HAVE SPARK!!!!! It was a bad CDI. I put the dynatek CDI and coil on and shee started sparking. I put the old CDI on with the new coil and no spark. So we got the carbs on, airbox on, exhaust on, taped wire harness and zip tied it to the frame, and ran the fuel lines. I am starting with 27.5 pilots, stock needles, and 310 mains. Toomey calls for 280.
Finally,The high school class project will be running.lol jk Glad you got it figured out.Now to=ime to finish up and take that powa for a nice rip!!
Hey good luck man hope you get it started!
Jeric
Thanks man. I have to buy some more spark plugs. The dynatek ignition says you MUST use resister plugs. So I have to go out and get some br8es. Then I get to use the carb sync tool.
Yes they did. Hopefully my eyes will bulge even bigger when it wheelies down the road.
haha wheelies,you might have to worry more about racing stripes on your underoos after taking that beast for a rip.lol
That would be awesome! I will work on it some tomorrow. I drank to much moonshine last night and I'm still experiencing some flu like symptoms
That would be awesome! I will work on it some tomorrow. I drank to much moonshine last night and I'm still experiencing some flu like symptoms
How to fix flu like symptoms: Drink more moonshine!!!I:I
Haha. That will be the plan tomorrow night. I am going to work on it all night tomorrow and wed night.
Got the new throttle cable, carb caps, clutch cable, and coolant guage on. Got the clutch adjusted. I'll be syncing the carbs tomorrow through the sight glass to get them close. Then one I get it running I'll use the synce tool. The only thing I don't have is some BR8es plugs and some gear oil.
Just ordered this today. That clutch is hard as sh*t to pull in. I put the tusk HD clutch in it. I only used 3 of the stiffer springs and used stock for the other 3. Hopefully this will help. BTW it is a new cable and it is routed as good as it can get.
Yamaha Banshee YFZ350 Fly Racing Clutch Lever and Cable | eBay
Yamaha Banshee YFZ350 Fly Racing Clutch Lever and Cable | eBay
Last edited by a moderator:
Got her ready to fire up. Put the engine ice in, synced carbs, reset timing to stock. Now I can use the CDI to adjust timing, that's what the little box in the picture is.
I mounted the pipes directly to the frame. the hangers put them to low for my liking.
I mounted the pipes directly to the frame. the hangers put them to low for my liking.
Got her ready to fire up. Put the engine ice in, synced carbs, reset timing to stock. Now I can use the CDI to adjust timing, that's what the little box in the picture is.
I mounted the pipes directly to the frame. the hangers put them to low for my liking.
Coming along nice! Like the idea of mounting the pipes to the frame!
