I just got a blaster and the kid I got it fron said the rear brake caliper wouldnt go on cause it has an axle from a rapter. Im rebuilding the hole thing and doing it right so I want to put the stock axle on. I was wondering if I would have to get different hubs, caliper, and sproket?
...Parts...Question...
- Thread starter broke_blaster2
- Start date
No, I put my brothers +4 Raptor axle in my '88 blasty and used my stock hubs, caliper and sprocket. So everything should slide back on your stock blaster axle. The stock raptor axle is about 1 inch wider thou.
i would stick with the wider axle and spend the same cash you're gonna on a stocker and buy a caliper for the rappy axle/carrier.
thats exactly what i would do cause its a cheap and pretty much free inch wider. youd be better off just buyin what you need to so you can hook up the brakes
thanks guys ill prolly just get a caliper for a rapter, if I do will the caliper just bolt up or do i need more parts?
A raptor caliper will not solve your problem.If you cannot get it to mount off the stock carrier then a bracket has to be made.Or just get a stock axle but the wider the better.
