OKO 30mm throttle cable

[brianfulcher15]

Ok so got my ebay ordered throttle cable today, and im somewhat worried that its the wrong part.

I dont have my carb yet to test so here's some pics of the cable.

Do these look right? its a pretty small end on the cable, and the sticker said its for honda, oem part number 17910-964-000

 

[Whitty21]

looks fine to me, the length will be the true test

 

[brianfulcher15]

i thought it was supposed to screw into the throtle?


any ways measured it up with the stock one and its about 6inches longer.

 

[brianfulcher15]

ok, so im guessing the OKO gets the narrow end. how does it stay in the carb with out coming our? most carbs ive used use a locknut screw in design.

here's some more pics compaireing the differnt ends and length.

 

[1bad442]

the oko carb will come with the adijuster in the top allready the cable just slips into it

 

[sicivicdude]

There is a indention made into the d slide and then a small plastic sleeve that slides down over top of the indention to trap that end into the indention. That's the correct cable as long as it's long enough to reach.

 

[Antec1200X]

i under stand what your askin about,its where the plunger thingy fits.and will the cable fit.try it and let us know.
i know most mikuni carbs have a lock washer trype to lock in the cable head to the plunger.not sure about that type

 

[brianfulcher15]

IT worked, still got to put the 4 wheeler back togather though to verify that its the right length