new pipe FMF fatty

[gizzy2014]

hey guys just picked up this pipe Sunday for $80 plus i partial traded a spare blaster frame we had sitting here

before cleaning:

After cleaning:

i used the aluminum foil trick, with a wire brush in the screw gun for the welds, and then rubbed some turtle wax polish on when done

sorry the pipe looks small i forget that the GoPro has that super wide angle lens on it so i need to get closer

 

[Awk08]

nice score and job cleanin her up !!

 

[gizzy2014]

thanks, got it on and sounds so much better than the stock pipe, pulls harder to

 

[Awk08]

thanks, got it on and sounds so much better than the stock pipe,

did the neighbor lady think it sounds better too ??

did you rejet and plug chop for the new added airflow of the pipe ???

 

[89blaster89]

nice toe shot!!!!!!!!!!!!

 

[gizzy2014]

nice toe shot!!!!!!!!!!!!

lol i was thinking the same thing when i posted it,

yep rejeted it also, idk but i was riding on our drive way last night at 10:30 to see how it sounded after putting it on

 

[Blaaster]

Plug chop before riding any more!

 

[gizzy2014]

Plug chop before riding any more!

too late rode for an hr or so today, i dont have a new one right now i dont think......

i know i should but im thinking its good cause it was rich before with the stock pipe,

but yeah i prolly wont be riding as neighbor is ticked off, and just dont feel like ridin right now so i will have a plug before i ride again

 

[Blaaster]

You know what thought did!

What jet did you use and what mods has it to contend with.

 

[gizzy2014]

You know what thought did!

What jet did you use and what mods has it to contend with.

yeah i know..... i have fmf fatty, fmf turbine core 2 (u.s.f.s) muffler, and currently have no air filter, running a 270 jet, and its cold here right now

 

[Blaaster]

Did I read no air filter, let me be the first to smack your wrist.

FMF= #260
No airfilter + 3 sizes.
Cold weather + 1 or 2 sizes.

Main should be #300 - 310.

Watch this space, here comes another rebuild thread.

 

[gizzy2014]

ok i will up it then plug chop it later

yes i said no air filter....... its like 12 degrees here covered in snow there aint no dust floatin around this time or year....

loool yeah that is prolly next if all goes well im sure it needs to be done anyway

 

[Blaaster]

ok i will up it then plug chop it later

yes i said no air filter....... its like 12 degrees here covered in snow there aint no dust floatin around this time or year....

Famous last words!

 

[gizzy2014]

yeah i suposse i will adjust to wht u suggest and plug chop before riding again

 

[gizzy2014]

Ok so blaster is in basement waiting for it to warm up to the touch so i can take carb out and switch jets and the biggest jet i have on hand is a 300 so hopefully that's what i need

Also need to get a few cheaper spark plugs to do chops with

 

[gizzy2014]

ummm?? i put the #300 jet in and plug chop was good, but it seems a little boggy in 2nd and third gear in the middle rpm's??

any suggestions

 

[Blaaster]

Plug chop at 1/2 and 3/4 throttle, the needle may need adjustment.

 

[gizzy2014]

ok, its not a bad bog u can mostly hear it alittle then feel it

 

[Blaaster]

Then is running poorly, needs fixing before it fixes you.

Bogging anywhere is bad.

Have you leak tested>?

 

[gizzy2014]

no i havent.... but it was perfectly fine till i jetted it differently