need help jetting (i know their r a million post about jetting)

[kx80berger]

i have a pod filter fmf fatty(i no worse pipe ever) tommey muffler trail port 67.50 piston i have the vitos jet kit i put the needle in all but the pipe and muffler r new not even ran with it on were should i run the clip and what jets should i use

 

[yb200]

needle 3rd clip 270-280 main.....do plug chop

 

[kx80berger]

3nd down or up on the clip

 

[blasterfreek30]

dude dont use that vitos needle.....they are not the same taper as a stock needle and will give u lotsa headaches trying to dial it in.....go back to the stock needle

 

[super noober]

dude dont use that vitos needle.....they are not the same taper as a stock needle and will give u lotsa headaches trying to dial it in.....go back to the stock needle

ive heard the same thing multiple times.

 

[Blasterdude27]

With my old set up of a fmf fatty and powercore2 silencer, super stock reeds and a clamp on I ran a 300 main, stock piolet with the needle in the middle. Ran perfect for me!