My 96 Blaster Build

[Twiztid_Blaster]

Well just kickin off the thread for my Blaster Build... will be taking pictures to add here in a few. i havent decided on colors to go with yet got a few ideas, but nothing solid yet. got few of the following in mind

Blue/yellow
red/black/white
blue/white/yellow
green/white/black

still debating, mean time gonna get you them before pics and start striping the bike more then what it is when i got it.

 

[cole454]

Sounds like a plan.
Just watch out for the mod bug, once it bites there's no stopping it.

 

[Twiztid_Blaster]

mod bug has bitten me very long time ago. here are some pictures, the way you see it is how i got it. pictures didnt come out so well but work for now.
it does have a new piston which i verified threw the exhaust port, also has Fmf fatty pipe and silencer i sure its the power core 2, reed spacers, itp front rims, and a frame skid plate, other then that its stock.

it is missing the following things, rear tires and rims, the plastic cover that goes on the clutch cover where the oil pump is.

Never mind wont let me upload pictures, says upload failed

 

[Stanimal]

hate to keep postin these things but.... have brand new itp t-9 rear wheels with new tubes and 50% tread on the tires for sale if you want em . good luck with the build tho

 

[Larry's Shee]

hate to keep postin these things but.... have brand new itp t-9 rear wheels with new tubes and 50% tread on the tires for sale if you want em . good luck with the build tho

Another 289 posts and you can use the "For Sale" forum I:I Good luck with the build I:I

 

[Twiztid_Blaster]

Another 289 posts and you can use the "For Sale" forum I:I Good luck with the build I:I

thank you, just wish my pictures would come threw to show what i am working with

 

[Twiztid_Blaster]

hope this works went threw with photobucket

this is how i got it.

 

[Larry's Shee]

The comment was for Stanimal on posting in 4 sale
Any specific plans for now? Least sounds like you don't have motor work to do right now. I:I

 

[Twiztid_Blaster]

The comment was for Stanimal on posting in 4 sale
Any specific plans for now? Least sounds like you don't have motor work to do right now. I:I

wish no motor work, i noticed jb weld on the bottom of the cases, im gonna chip it off and inspect it, maybe the 2 cases were not sealed properly or can be cracked, if so i want to replace them. also the clutch cover has been welded on aswell and kick starter does not return when pushed down. no biggies just gonna cost money is all... my plans for now is to get it looking good and all greased up properly and replace anything broken, or worn, repainting alot of things. just wanna get it running so i can ride and as time goes on ill be buying more stuff here and there. so it will be a continuing build even when its done put together.

at the moment im in the process of strpping the frame down to get it prepped for painting. may paint it yellow or red havent decided yet

 

[alex90]

blue n yellow with black plastics

 

[Twiztid_Blaster]

update on were i am at right now..... got it down to bare frame and i was cleaning it up and stripping the old paint and noticed it looked weird, notcied the frame is bent.... it is bent up at the front bottom tubing behind the back arm mount so if it was together the right front wheel would be closer to my feet then the left. now my project is on hold until i find another frame that is in good shape X(

 

[Twiztid_Blaster]

well still no frame, but tonight i did manage on picking up the right and left crankcases, and the clutch cover with the plastic oil pump cover all for 45 bucks

i did need all them cases, my crank cases are jb welded on the bottom and the clutch cover has a hole in it and has been welded shut. now i can build the motor.

Still waiting on finding a stock carb, throttle cable, thumb throttle cover, rear tires and rims, and a frame and grab bar, to make her all complete.

i may consider a trade for the carb i have that came with it. need to check size may be a 34 or 36 keihin. im looking for a stock one for now

 

[Twiztid_Blaster]

ok i have a frame, but front motor mounts have been cut off, gonna reweld new ones off the old frame. paid 40 bucks for a rolling frame, sometime next week i get the mounts welded up and start the project I:I

 

[Twiztid_Blaster]

Been very busy past few months, planning on starting up the build soon. I have decided on colors so tomorrow im picking up the paint for the frame and suspension parts, and call up my buddy to have the motor mounts welded on to the new frame i got. Probly gonna buy the graphic kit for it aswell but will sit around until i get my new plastics for it, since ill be running the ones it came with for now.

Just thought id pop in and get the thread going, I havent flaked out on this build...... Yet!!!

 

[Twiztid_Blaster]

Picked up rear rims, tires, hubs off of a banshee for 50 bucks and he threw in the banshee axle with it all. axle looks like its never been used before anyhow if any one reads this is the rear axle of a banshee able to be ran in the blaster?

waiting on a carb to come in the mail so only a few more parts and i should be on my way I:I

 

[Twiztid_Blaster]

Frame got the front motor mounts welded on and also added a brace on the frame behind the rear a arm mount, seems blaster like to bend there since my original frame is bent there and the other frame i was gonna get was bent in the same spot. going to sand frame tonight and get it ready to be painted tomorrow, will post updated pictures tonight aswell.

Finally i get to progress this full rebuild I:I

 

[1995blaster]

Looking foward to pics.

 

[04YamahaRider]

Picked up rear rims, tires, hubs off of a banshee for 50 bucks and he threw in the banshee axle with it all. axle looks like its never been used before anyhow if any one reads this is the rear axle of a banshee able to be ran in the blaster?

waiting on a carb to come in the mail so only a few more parts and i should be on my way I:I

Yep a Banshee axle will def work

 

[Awk08]

i thought you need the shee brake disc/hub and sprocket/hub for the shee axle also ???? but it will fit into the carrier

and yes, i've bent 2 frames myself in that same spot