Hey guys, ok looking for a leak down tester. I've been to a bunch of different stores burned at least 50 buck in diesel. Can't seem to put a tester together. It's really been pissing me off. So can I get details on how to order one and about how long it takes to get to San Antonio Texas if ordered ASAP. Thanks guys
Leak down tester
- Thread starter Sruiz67
- Start date
message member awk08 he sells them for 32 bucks shipped i think and ships priotity mail wich is like 2-3 days?
PM sent,
if you transfer $ tonite, i'll ship tomorrow usps 2-3 day priority, you should have it by saturday at the latest.
$32 to your door with expandable exhaust plug.........
http://www.blasterforum.com/sale-18/leakdown-testers-55015/
if you transfer $ tonite, i'll ship tomorrow usps 2-3 day priority, you should have it by saturday at the latest.
$32 to your door with expandable exhaust plug.........
http://www.blasterforum.com/sale-18/leakdown-testers-55015/
the bicycle pump works best, as no more than 7 lbs pressure should be applied or risk blowing your crank seals out, it should hold that 7 lbs for at least 5-10 minutes, some suggest it lose no more than 1 lb per minute ? < i've run then with a slow leakdown with zero ill results, but holding the 7 lbs. is best.
a compressor can be used if left off and leaked down to under 10-15 lbs to apply the pressure to the tester.
i've try'd just bumping them with the compressor while testing each...a quick bump resulted in 30+ lbs. being inserted.
use a bicycle pump for best/safe results
using leakdown tester.........
http://www.blasterforum.com/do-yourself-20/how-perform-leak-down-test-44653/
http://www.blasterforum.com/do-yourself-20/build-use-leakdown-tester-10663/
Leak Down Test For 2-Stroke Engines.avi - YouTube
Motorcycle Repair: 2 Stroke Leak Down Test using Motion Pro Tester and Hodaka Engine - YouTube
Cool man, figured the bike pump. I appreciate it. As soon as I figure out how to get you the green. I'll send it. Also should I be ready for a leak and order a gasket kit? Might be a fund ass ? But can u use some gasket maker? Like for cars? Thought I should ask before I do and mess something up.
i've used permatex ultra copper and yamaha case bond on the intake gaskets... both with good results
there are no dumb questions when asking for legitimate advice
So I did a bunch of shenanigans. I think I sent the cash. Hope so. Anywho thanks in advance. I know this thing is well worth it and I should have done this 2 weeks ago.ive wasted so much time farting around with trying to build one. All who see this please take my advice, if you need one just pay the 30 bucks. I've wasted a ton of my time and diesel driving to like 6 stores in the area.
