Jets dont open, throttle cable wont move
- Thread starter CrownCustom
- Start date
Hey blaaster Ive just decited to get a OKO 30mm but not sure what one to go with, any suggestions?
OKO 30mm are absolute swines to jet if you have not done it before, but once perfected seem to cut the rubber.
There are a few folks who may be able to help in this dept.
There are a few folks who may be able to help in this dept.
Stock carbs are a dime a dozen on ebay.Just buy a stock carb and be done with it. Oko carbs are knock offs and pure junk.
Surfjag has one for sale 30 shipped.
http://www.blasterforum.com/sale-18/keyswitch-stock-carb-coil-03-cdi-57538/
The stock carb is wonderful. Only need something bigger with big mods.
http://www.blasterforum.com/sale-18/keyswitch-stock-carb-coil-03-cdi-57538/
The stock carb is wonderful. Only need something bigger with big mods.
there ya go, just PM him to hook up with him, no need to access the marketplace I:I
And that was my logic, but a stock mikuni is 120 at least, where the china cheap special is 50, and I could swing that. Hopefully he gets back but all I could do is post on another threat he posted on, which I know is frowned upon
Let me go see what I have in the parts box. I think I have one with a tors unit on it.
Be back in 10 minutes.
Be back in 10 minutes.
Awsome, I dont care about the tors block, I was in the process or removing mine, went throught and disabled it then found the carb Issue. Can do paypal too.
I'll sell it to ya for $30 shipped. I'll go over it real quick if you want it. The Extra $20 you save, spend on jets and plugs so you can plug chop and get the bike running right.
Ya thats whats I got out of it, talkin to a guy about the banshee carb, but just to make sure its just two of the mikuni 28mm right blaaster?
Blaaster, what all is he going to need? I saw you were talking with him. I have a stock carb here with a tors block unit. The oil injection nipple is not vaccum capped.
Id need a cap if I removed the tors block? Ive got mine wired out so I wouldnt then, or could use my old one right? and the pm stuff is confusing me so just e-mail me at robertfliearman@gmail.com for paypal info.
