Cracked crank case help

[max96ss]

I have a cracked crank case where the clutch pedal inserts unfortunately. I dont know if I should attempt to fix this myself or just take it to the shop. I was unsuccessful in finding a repair manual locally. I'm not afraid to tear into it and just wanted to see what I was getting myself into.

 

[yb200]

get a new case half off ebay and check out this thread lots of pics and look on ebay for a manual
http://www.blasterforum.com/engine-mods-swaps-129/build-has-begun-19421/

 

[super noober]

jsut put a small piece of ducttape over it, mabey 2 or 3" long. haha just playin, you can either try some jb weld or get a whole new case which would require a few special tools and changeing everthing in that case ove rto the new one.

 

[stephen12091985]

theres a downloadable manuel on here.and yea get one off ebay.and you could upgrade to the +3 crank while its apart

 

[Paulie B]

It's no big deal.
Sand the paint off the area that is cracked , wipe it down with some acetone or lacquer thinner and put some JB weld on it- the quik steel kind not the liquid.

 

[blasterfreek30]

hmmm....mabe a case saver could have prevented that lol

 

[max96ss]

Thanks for the input, i'll try the duct tape fix first...