blew my clutch today!

[murderedblaster]

UGHHHHHH!!! I got my blaster out the van up the trail to the beach , hit the gas on the beach, bang through the gears and then nothing!!!
bike runs and when i put it in gear it feels like it wants to move but won't..... has to be the plates gonna change them and see what happens.....
do i need any specific tools to do this?
also anyone know why this would of happened or its bound to happen on evry bike?

 

[murderedblaster]

no body ????????

 

[brandoz28]

definitely sounds like a clutch problem. crack that biotch open and check it out!

 

[murderedblaster]

sounds good do i have to prep the clutch plates with oil before puttin them in? saw some video on you tube thats what they did, if so what kind of oil?

 

[blaster99]

yea let em soak for at least an hr

 

[murderedblaster]

what kind of oil????

 

[Blaster200boy]

what kind of oil????

Bel-Ray Gear Saver 75W or whatever you use for your bottom end oil........

 

[sr5bidder]

I converted to ford type F tans fluid for all my 2 stroke gearboxes about 1 1/2 yrs ago...its cheap and the clutch action is great and I change it about every 6 hrs.

 

[murderedblaster]

Thanks fellas ussually use the bel ray so i'll just soak them in that.....

 

[sr5bidder]

what kind of mini van is you blaster in? sort of looks like mine

 

[fioz600r]

Soak the plates over night.

And I bet it is a Ford Windstar. Thats what I have and looks like mine LOL.

 

[2strokepower]

same thing happened to me but my clutch was so f*cked up that the kick start was jammed.

 

[murderedblaster]

It's a Nissan Quest got it for free just like the bike...

 

[J4M1E333]

yeah, the clutch isnt that hard to do, recently done mine check the springs for length and if there out of spec, may aswell get some new ones with the clutch kit, soak them for a while then install alternating friction plates with steel plates, ensuring that the friction plates end up either end. make sure that the dampner is the 2nd friction plate in from the outside. Also may aswell check everything else is ok while your in there I:I check the clutch gear for play against the clutch basket, check both pressure plates for wear, the gears for chips Etc then new gasket, bolt her back up, fill with 650Ml oil and your ready to tear it up again I:I