Awk08 Rear Hydraulic Brake Kit

Rear Hydraulic or stock brakes


  • Total voters
    5
  • Poll closed .

Cbgsxr

New Member
Sep 19, 2014
2
0
1
34
Very interested in purchasing Awk08's rear hydraulic kit, I'm new to the forums. Just bought a 99 Blaster and the current brakes do not work at all. Thanks.
 
Guess I shoulda updated this when I sent the PM earlier :)
 
Thanks BlasterFun484, Awk replied like instantly.... The forums work pretty fast, i'm surprised!
 
Is he still selling this setup? Interested in some info on it if it's not to pricey
 
sorry guys, I'm so swamped at my day job, I just cannot build any of these right now.
check back in a few weeks to see if things have slowed down here ?
 
  • Like
Reactions: blastertrucker
sorry guys, I'm so swamped at my day job, I just cannot build any of these right now.
check back in a few weeks to see if things have slowed down here ?
Hey awk, are you selling your brake setup right now? I could use one and I have no idea how to pm!
 
sadly no :(
still way too busy to build these in the evenings or weekends.
might have to be an offseason thing only from now on ?
That really sucks I heard you have amazing deals and product...I guess I'll try and find a cheap one on eBay or something:(..if you do start again please tell me incase I haven't bought one yet!
 
sadly no :(
still way too busy to build these in the evenings or weekends.
might have to be an offseason thing only from now on ?

Hey awk just found you and heard you have a great set up to stop blasters fast. my rear brakes are shot. do u have any breaks left?
 
The qoute of mine you posted tells the story.
Not making them anymore :(

Dang, any idea where I can get one without much modding? My rear stopped working and had to ram the front brakes and I rammed pretty good the other day, flipped and the quad about landed on me, but I can be going 60+mph and just use the fronts to stop asap LOL
Thanks
 
I use 03+Blaster/Warrior/Raptor/Banshee calipers on the back with an adapter plate.
Here is the caliper in position and the adapter plate if you wish to copy it:
17343070_10154945618430803_2775324710488280059_n.jpg

(note, the mount plate is off for the picture and the caliper is just sitting on the rotor in this pict, it sits lower when mounted)

I have used various master cylinders, although they typically involve some welding:
17425108_10154945620265803_4817040954293044559_n.jpg


Easy-peasy...
 
This is an old thread. Don't think Awk08's been on in a long time and he wasn't making his brake kit anymore. You can prolly find a kit online but not cheap. If you have a welder & some fab skills you can build one. The Blaster rotor floats so it's not so difficult. Something like this will get most of the parts you need.
Put a yz85 caliper/ master cylinder on our guest Blaster over 10yrs ago, still working great.
1000007546.jpg

Good luck 🍻
 
Last edited: