White Smoke And Noise!!! Please Help!!!

[sicivicdude]

I will leave my other post so that there isn't any question...

Derek, I apologize and stand corrected. The manual does specify "type SE 10w-30" engine oil so you were right.

That being said, having had experience with wet clutches in the past, I wouldn't run standard car engine oil in my bottom end except in the event I discovered a leak out on a ride and it was that or lock something up. I am running ATF and would at the very least run oil certified JASO MA.

 

[Zwiser]

to put a video up just put it on utube and giv us a link

 

[darederek]

I will leave my other post so that there isn't any question...

Derek, I apologize and stand corrected. The manual does specify "type SE 10w-30" engine oil so you were right.

That being said, having had experience with wet clutches in the past, I wouldn't run standard car engine oil in my bottom end except in the event I discovered a leak out on a ride and it was that or lock something up. I am running ATF and would at the very least run oil certified JASO MA.

i have heard that and when i change my oil i might switch but for now i am running heavy duty 10w30 (actually its john deere brand) and i made sure it had no friction modifiers. i almost put some in that had friction modifiers but gladly i caught myself

 

[Blaster2006SE]

Im putting a Vid up now... Its Really bad quality because its in a dark shed and didnt have time to take one in the light earlier but I mainly want you guys to hear how it sounds and you can see the smoke... It will be up in a few minutes

 

[Blaster2006SE]

Its Dark for the 1st half but you can hear it and see the smoke just wait a few seconds

 

[Zwiser]

I've heard that sound before if u have the thottle down the whole way it's ur carb or that's wat happend to me and that's slot of smoke my guess is crank seals but let some one else confirm that just to be sure

 

[Blaster2006SE]

Yup I had the throttle all the way down, and ya its a ton of smoke... what do you suggest I do with carb? just clean it? or does it need to be replaced? Sorry Im new to all this... im good with tools and can pretty much work on anything but whats the best way to go about cleaning the carb (if its needed) I bought some carb cleaner just never used it yet...

 

[Zwiser]

Well wat I did to clean my carb is I took it all apart and inspected it make sure there's no dirt in it and then let it sit apart in gas for q couple hours then blew it dry with comprest air And if that doesn't work ur going to need to unplug your tors but I'm almost certain the noise is ur carb btw take off ur gas tank it makes it SO much easer to put it back on. While u hav the carb apart check ur jet sizes for future refrence

 

[super noober]

is your tors disconnected? that sounded like major sh*t!!

 

[Blaster2006SE]

nope tors is connected... this all happened after I changed all the fluids I dont get it :-/

 

[super noober]

disconnect it and see what happens, you say you had that floored in the vid?

 

[bagds10]

sounds horrible. reminds me of an old steam engine or something

 

[Blaster2006SE]

lol bagds and yup i had it floored in the vid all the way, and what do i do 2 remove tors just unplug wire from carb is that correct?

 

[sicivicdude]

take your parking brake off.....

 

[bagds10]

disconnect it from the carb, from the throttle (there is 2 wires that come out of it), and underneath your hood there is a box. follow the wires from your throttle to the box. there is a diy in case you need some pictures

 

[darederek]

guys he has an 06 where the tors is in with the cdi. look up a tutorial for an 03-06 you have to do some things different

 

[super noober]

guys he has an 06 where the tors is in with the cdi. look up a tutorial for an 03-06 you have to do some things different

he needs to unplug the connectors tehn twist them together. i did it on a 04

 

[Blaster2006SE]

unplug them from where super noober and twist them together

 

[bagds10]

o sorry. my bad. i didnt pay attention to the year.

 

[sicivicdude]

Take your parking brake off and try to rev. The 03'-06' CDI box has a circuit in it that won't let your engine do anything more than JUST above an idle if your parking brake is still on.