What Jets Are You Using

1) What type of aftermarket exhaust do you have? Fmf fatty full system

2) What type of airfilter do you have? foam no brand

3) Are you a)running a stock airbox with lid stock airbox with NO lid c) Stock airbox with vents d) no airbox at all? stock without snorkel

4) What is your elevation? 3,573

5) What size pilot jets are you using? stock

6) What size main jets are you using? stock

7) What is your Bore Size? stock im pretty sure

8) Do you have a port job? i dont think so

9) What kind of carb? stock

10) What size is your carb? stock



Read more: http://www.blasterforum.com/threads/what-jets-are-you-using.28981/#ixzz3XzzeFqxY
 
1) What type of aftermarket exhaust do you have? Fmf fatty full system

2) What type of airfilter do you have? foam no brand

3) Are you a)running a stock airbox with lid stock airbox with NO lid c) Stock airbox with vents d) no airbox at all? stock without snorkel

4) What is your elevation? 3,573

5) What size pilot jets are you using? stock

6) What size main jets are you using? stock

7) What is your Bore Size? stock im pretty sure

8) Do you have a port job? i dont think so

9) What kind of carb? stock

10) What size is your carb? stock



Read more: http://www.blasterforum.com/threads/what-jets-are-you-using.28981/#ixzz3XzzeFqxY
 
1) What type of aftermarket exhaust do you have? Toomey B1

2) What type of airfilter do you have? K&N

3) Are you a)running a stock airbox with lid stock airbox with NO lid c) Stock airbox with vents d) no airbox at all
NO AIR BOX AT ALL
4) What is your elevation? (If you don't know, go here: Topographic Maps & Aerial Photos for United States & Canada )210 FT ABOVE SEA LEVEL

5) What size pilot jets are you using?STOCK BUT BUMPING UP TO 35

6) What size main jets are you using?310

7) What is your Bore Size?68.00 (thats right 207cc bitches lol)

8) Do you have a port job?NO but KOR is 10 mins from my house so this winter YES

9) What kind of carb?STOCK

10) What size is your carb? STOCK

Read more: http://www.blasterforum.com/threads/what-jets-are-you-using.28981/#ixzz3Y1stTSsz
 
  • Like
Reactions: jus_me and Awk08
FMFblaster97 said:
) What type of aftermarket exhaust do you have? FMF Fatty with Turbine Core II

2) What type of airfilter do you have? K&N Clamp On

3) Are you a)running a stock airbox with lid stock airbox with NO lid c) Stock airbox with vents d) no airbox at all? No Airbox

4) What is your elevation? about 0

5) What size pilot jets are you using? 32.5 stock

6) What size main jets are you using? 250

7) What is your Bore Size? .040 over

8) Do you have a port job? trail

9) What kind of carb? stock

10) What size is your carb? about a 27mm
Click to expand...
nbritt851 said:
do i need new jets if i just got reeds?
Click to expand...
BlasterCrazy said:
I got this off of the banshee Hq site and I think we should have it to this will give a lot of people a great base line for jettin the crabs and hopefully people that are using odd crabs will diff write on this that people aren't rippin there hair out tryin to figure out a base line with that crab

Copy And paste this part then fill it out
1) What type of aftermarket exhaust do you have?

2) What type of airfilter do you have?

3) Are you a)running a stock airbox with lid stock airbox with NO lid c) Stock airbox with vents d) no airbox at all

4) What is your elevation? (If you don't know, go here: Topographic Maps & Aerial Photos for United States & Canada )

5) What size pilot jets are you using?

6) What size main jets are you using?

7) What is your Bore Size?

8) Do you have a port job?

9) What kind of carb?

10) What size is your carb?
Click to expand...
98blasterworked said:
hey i have a question... i live in NY... and im on the dynojet website and it says i shud be using a 220 main for my mods... and im on a 350 right now... i was wondering if i put the 220 in and started it... wud it just be sooo lean that it will blow before i have time to shut it off.... i dont think it will considering dynojet is reccomending it
Click to expand...
If you have a stock carb, Stick with stock pilot jet and , you need to go with a 280 main jet with clip on 4th notch down on slide needle.
 
1) What type of aftermarket exhaust do you have? FMF Fatty with Power Core II

2) What type of airfilter do you have? K and N

3) Are you a)running a stock airbox with lid stock airbox with NO lid c) Stock airbox with vents d) no airbox at all? Open Air box Outerwear cover

4) What is your elevation? 1200 ft.

5) What size pilot jets are you using? Stock

6) What size main jets are you using? 280

7) What is your Bore Size? 1 size over

8) Do you have a port job? No

9) What kind of carb? Stock Mikuni

10) What size is your carb? 26mm

11) Reeds? Boyseen Power Reeds

12) Oil injection? No
 
  • Like
Reactions: Awk08
1) What type of aftermarket exhaust do you have? FMF Fatty

2) What type of airfilter do you have? K and N...with Outerware

3) Are you a)running a stock airbox with lid stock airbox with NO lid c) Stock airbox with vents d) no airbox at all? Open Air box Outerwear cover

4) What is your elevation? Around 600 ft.

5) What size pilot jets are you using? Stock

6) What size main jets are you using? 310

7) What is your Bore Size? 1 size over

8) Do you have a port job? Yes KOR Ported and Head Mod

9) What kind of carb? Stock Mikuni

10) What size is your carb? 26mm
11) Reeds? V-force 2
12) Pre-mix 32-1
13) Hauls a$$ pretty good !!
 
1) What type of aftermarket exhaust do you have? Stock pipe/silencer

2) What type of airfilter do you have? Foam

3) Are you a)running a stock airbox with lid stock airbox with NO lid c) Stock airbox with vents d) no airbox at all Lid and snorkel

4) What is your elevation? (If you don't know, go here: Topographic Maps & Aerial Photos for United States & Canada ) 960 ASL

5) What size pilot jets are you using? Stock

6) What size main jets are you using? 260

7) What is your Bore Size? Forgot. Vito's Super Stock piston.

8) Do you have a port job? No

9) What kind of carb? Stock

10) What size is your carb? 26mm
Cheap rebuild for flipper.
 
1) What type of aftermarket exhaust do you have?
Dg pipe and silencer. Came with the bike
2) What type of airfilter do you have?
Generic dual element uni type.
3) Are you a)running a stock airbox with lid stock airbox with NO lid c) Stock airbox with vents d) no airbox at all
Stock box w/o lid
4) What is your elevation? (If you don't know, go here: Topographic Maps & Aerial Photos for United States & Canada )
700 ft asl
5) What size pilot jets are you using?
Stock 32.5
6) What size main jets are you using?
290,300,310
7) What is your Bore Size?
Stock (maybe up to .020 over)
8) Do you have a port job?
Not that I know of
9) What kind of carb?
mikuni vm
10) What size is your carb?[/QUOTE]
Stock 26mm

Another item of importance 32:1 premix oil is also pulled through this carb and jets.
 
What type of aftermarket exhaust do you have? Fmf with toomey silencer.

2) What type of airfilter do you have? Twin air

3) Are you a)running a stock airbox with lid stock airbox with NO lid c) Stock airbox with vents d) no airbox at all::::: stock air box with lid off

4) What is your elevation? (If you don't know, go here: Topographic Maps & Aerial Photos for United States & Canada ) 670ft

5) What size pilot jets are you using? Not sure

6) What size main jets are you using? 270

7) What is your Bore Size? .60 over

8) Do you have a port job? No

9) What kind of carb? Stock

10) What size is your carb? Stock

Read more: http://www.blasterforum.com/threads/what-jets-are-you-using.28981/#ixzz41F4UKJUR
 
1) What type of aftermarket exhaustdo you have?
-FMF Fatty w/ Powercore 2 Silencer
2) What type of airfilter do you have?
-UNI
3) Are you a)running a stock airboxwith lid stock airboxwith NO lid c) Stock airboxwith vents d) no airboxat all
-Stock Airbox with lid.
4) What is your elevation?
-roughly 1000' ASL Ohio/West Virginia
5) What size pilot jets are you using?
-Stock
6) What size main jets are you using?
-310
7) What is your Bore Size?
-.30 Over
8) Do you have a port job?
-Home Port, not professional
9) What kind of carb?
-Stock Carb
10) What size is your carb?
-Stock Carb
 
Fmf fatty with power core 2

Uni 2 stage

Stock box with no lid

Stock

340 main
Needle on second clip

About 700 ft

Stock

Stock but being shipped to kors

Mikuni 33mm
 
1) What type of aftermarket exhaust do you have?
-stock
2) What type of airfilter do you have?
-UNI
3) Are you a)running a stock airboxwith lid stock airboxwith NO lid c) Stock airboxwith vents d) no airboxat all
-Stock Airbox with lid.
4) What is your elevation?
-roughly 390 ft above sea level (vernon ct)
5) What size pilot jets are you using?
-Stock
6) What size main jets are you using?
-240
7) What is your Bore Size?
-.66.50 one size over stock
8) Do you have a port job?
-no port
9) What kind of carb?
-Stock Carb
10) What size is your carb?
-Stock Carb
 
1) What type of aftermarket exhaust do you have? Gutted stock expansion chamber with fmf shorty slip on

2) What type of airfilter do you have? Stock foam

3) Are you a)running a stock airbox with lid stock airbox with NO lid c) Stock airbox with vents d) no airbox at all? lid on with numerous small and larger holes evenly distributed

4) What is your elevation? 290 ft

5) What size pilot jets are you using? 1.7 mm drill bit.. haha

6) What size main jets are you using? same as mikuni 330

7) What is your Bore Size? 1 size over

8) Do you have a port job? Self port polished and intake enlarged as well as exhaust
took a bit off the head top... if measured id say 35-40 mins of sanding the head with 1000 grid placed on glass

9) What kind of carb? OKO powerjet

10) What size is your carb? 30 mm
11) Reeds? Boyesen dual stage petals, also enlarged reed cage openings
12) Pre-mix 32-1
13) Hauls a$$ pretty good !!

Read more: http://www.blasterforum.com/threads/what-jets-are-you-using.28981/page-5#ixzz4MWTyrLbb
 
FasterZAblaster said:
1) What type of aftermarket exhaust do you have? Gutted stock expansion chamber with fmf shorty slip on

2) What type of airfilter do you have? Stock foam

3) Are you a)running a stock airbox with lid stock airbox with NO lid c) Stock airbox with vents d) no airbox at all? lid on with numerous small and larger holes evenly distributed

4) What is your elevation? 290 ft

5) What size pilot jets are you using? 1.7 mm drill bit.. haha

6) What size main jets are you using? same as mikuni 330

7) What is your Bore Size? 1 size over

8) Do you have a port job? Self port polished and intake enlarged as well as exhaust
took a bit off the head top... if measured id say 35-40 mins of sanding the head with 1000 grid placed on glass

9) What kind of carb? OKO powerjet

10) What size is your carb? 30 mm
11) Reeds? Boyesen dual stage petals, also enlarged reed cage openings
12) Pre-mix 32-1
13) Hauls a$$ pretty good !!

Read more: http://www.blasterforum.com/threads/what-jets-are-you-using.28981/page-5#ixzz4MWTyrLbb
Click to expand...
Did you gut the pipe yourself? Took the extra crap out of front and rear cones?
 
1) What type of aftermarket exhaust do you have? 2004 KTM 200 pipe, 1999 CR250 muffler.

2) What type of airfilter do you have? Stock foam

3) Are you a)running a stock airbox with lid stock airbox. No airbox, k&N foam clamp on
4) What is your elevation? 850 ft

5) What size pilot jets are you using? Std 32
6) What size main jets are you using? 210

7) What is your Bore Size? 1 size over

8) Do you have a port job? Self port polished

9) What kind of carb? Stock Mikuni

10) What size is your carb? 26mm
11) Reeds? Boyesen dual stage petals.
12) Pre-mix 32-1
13) Hauls a$$ pretty good !!

14) Engine in 2001 YZ125 frame.
 
For the folks out there who are running a Mikuni VM 34 with a K.O.R. port and head mod. , this is what I'm running, and it ripz.
Main jet: 390
Pilot jet: 70
Needle jet:p-5
Jet needle 6f5
Runs clean from mid to top, chuckles slightly off idle(I like it a little fat on the bottom) I Ran the main as rich as it would have it then went up or down depending how it pulled on top. Plug chop dry and darker brown at the base. Hope this helps, took lots of hours to figure this one out!
 
MDT50 said:
For the folks out there who are running a Mikuni VM 34 with a K.O.R. port and head mod. , this is what I'm running, and it ripz.
Main jet: 390
Pilot jet: 70
Needle jet:p-5
Jet needle 6f5
Runs clean from mid to top, chuckles slightly off idle(I like it a little fat on the bottom) I Ran the main as rich as it would have it then went up or down depending how it pulled on top. Plug chop dry and darker brown at the base. Hope this helps, took lots of hours to figure this one out!
Click to expand...
p-5 needle jet.
 
You must log in or register to reply here.

Similar threads

M
What jets do I need?
Replies
0
Views
293
Jetting
mattruss69110
M
B
Jet thread pitch
Replies
0
Views
381
Carburetor
Blastermankyle
B
Yz125killer
PLEASE HELP ME!!!!!!!
Replies
19
Views
858
Carburetor
tibblits
tibblits
E
Finally have a (kind of) running blaster after combining two (carb / air filter questions)
Replies
12
Views
611
Engine
RIDE-RED350r
RIDE-RED350r
J
Porting a chinese kit.
Replies
2
Views
278
Engine
OConnor Racing
OConnor Racing
Top Bottom
Back