this a good bb place

[sicivicdude]

boyesen power reeds are fine.

Most of the time a 30mm (ID) carburetor can be shoehorned into the stock manifold but sometimes the float bowl is too large to not hit the clutch lever. A reed spacer is the ticket for that problem.

 

[JareeB]

boyesen power reeds are fine.

Most of the time a 30mm (ID) carburetor can be shoehorned into the stock manifold but sometimes the float bowl is too large to not hit the clutch lever. A reed spacer is the ticket for that problem.

alright so heres what i need to do
send my jug to oconner
buy a 30mm carb and boyesen power reeds
uni air filter

now what about jets?
i have a fmf gold series pipe

 

[1bad442]

alright so heres what i need to do
send my jug to oconner
buy a 30mm carb and boyesen power reeds
uni air filter

now what about jets?
i have a fmf gold series pipe

id start with a 300 main jet

 

[JareeB]

id start with a 300 main jet

okay well its gona be awhile before any of this happens still trying to get a job.

thanks for the help everyone

 

[roadkill]

DONT GET THAT CARB!! its a four poke carb with the wrong style intake

 

[JareeB]

DONT GET THAT CARB!! its a four poke carb with the wrong style intake

okay than what carb is the right one

 

[bagds101]

that intake on that carb ABSOLUTELY will not fit a blaster. look for like a 30mm on ebay or your local craigslist

 

[super noober]

second link is not right as they picture a la sleeve kit but say u need to send your stock jug and head into them as they sleeve it and machine it them selves which is bull if its really a la sleeve kit. best bet is to just call ken oconnor racing

really? i never read the description just went by the pic. well you know what they say, one call does it all... lol