Rebuild on the "FREE SHEE"
- Thread starter Wifesblaster
- Start date
Well when/if it goes I will do something good. I have already put 5 gf's into this bike. Have to draw the line somewhere!
Yup stock crank. There was no rod play or tight spots in the bearings. If it ain't broke don't fix it.
true and welded crank? just would suck to have it break on you after all this work
just my .02
Well I don't know if it's trued and welded or not. I talked to Ken and those cranks usually hold up pretty good.
Not yet. I have been working all day and doing a tile all night. I will get some tuning in this weekend.
Made some progress last night. Still have some tuning to do. I will be ordering a 13 tooth front sprocket soon. Top speed is to high with 14/40.
Last edited:
That thing is BEAST!
What did you do over the radiator? little strips of chrome?
I think the rims from phragles would look beastly on the shee!
What did you do over the radiator? little strips of chrome?
I think the rims from phragles would look beastly on the shee!
Last edited:
yea that thing is gonna be sweet only thing I would change is atlest get some stock rear plastics or trim them back more
I like the way the plastics look. I cut them that way because everybody else cuts them the same way.
I bought the grill like that. Going and making some vids with the go pro now.
I bought the grill like that. Going and making some vids with the go pro now.
Those are the first vids I've ever made and uploaded so they are probably not the best. There will be more to come now that I know how to do it!
Those were second and third gear wheelies with no clutch. I'm still breaking it in so I didn't want to rip on it to hard. It will pull it up in fourth too though. Once I get the jetting right and gear it down some it will be nasty I:I
The boat isn't really that big. It's only a 25'
looked big, hows that banshee compared to the blaster lol, not even comparable
Well it pulls a lot harder of course. I haven't really had much ride time, but I think I could smoke it in the trails with my blaster. I still have to put the works shocks on it too. I am very pleased with it so far.
Last edited by a moderator:
So I put the clips on the needles in the 4th slot. This helped a lot on bottom end and midrange. I am going to bump the mains up to 320 and should be almost ready for a plug chop.
