pro taper bars, calipers and nerfs

[3 Wh33l3r Rid3r]

im cleaning out my shop and may have some other parts i will add later

a set of front calipers in great shape, pads look almost new 50 shipped

pro taper 1 1/8 carmichael bars 50 shipped WILL NOT FIT STOCK CLAMPS

blaster hubs 20 shipped

alba pro elite nerfs 75 shipped these are off a yfz, they bolt up to the peg but you will have to rig something up for the front mount

 

[sborns]

PM sent 15151515151515151515

 

[88' blaster]

bump........... great guy

 

[NEONNIGHT34609]

offer sent on nerfs

 

[3 Wh33l3r Rid3r]

bump ttt...........

 

[NEONNIGHT34609]

take my offer on the nerfs dame it LOL

 

[3 Wh33l3r Rid3r]

take my offer on the nerfs dame it LOL

what offer? never got one

 

[NEONNIGHT34609]

o hell i will send it again. i just thought you where ignoring it lol. wish i knew before you sent out the shock

 

[3 Wh33l3r Rid3r]

calipers are SOLD

 

[3 Wh33l3r Rid3r]

just thought i would do a little update for the guys that have messaged wondering if they would work with stock arms, first i figured they would be pretty close and rub but i thought of a way today to make em work and actually gives alittle more clearance. all you would have to do is bolt them up on backside of the peg. when i swapped em that way it gave me right at 3 inches of clearance to the tire at the closest point when turning. so that should give stock arms right at 2 inches of clearance. even with stock arms being 3 inches shorter i still dont see it being any closer to the tire. you would still have to do something with the front mount but that can be easily done.

heres a couple pics

the last pic that mount piece will rotate all the way around so you can adjust to where it would need to mount. my frame is modified or i would build a bracket for it so you would be on your own on that one. these are a little bigger than most blaster nerfs so should give u a little more protection for your feet

 

[NOVIS]

^^^just a heads u for everyone, if your runnin stock a arms with flipped wheels they will probably rub because the stock a arms are 1 inch back also (unless those are just +3) plus if the wheels are flipped they move more instead of just pivoting on one point.

 

[3 Wh33l3r Rid3r]

^^^just a heads u for everyone, if your runnin stock a arms with flipped wheels they will probably rub because the stock a arms are 1 inch back also (unless those are just +3) plus if the wheels are flipped they move more instead of just pivoting on one point.

my arms are 1 inch forward, my tires are also 21" with alot of air so if u run lower pressure or 20's on the front u could get a little more clearance

 

[J2PUISANT]

Do you still have the nerf bars?

 

[3 Wh33l3r Rid3r]

Do you still have the nerf bars?

yep i still have em

 

[JonS]

how much for the pro taper bars?

 

[3 Wh33l3r Rid3r]

Nerfs are sold!