Porting?????

[Country Blaster]

Was ripping on the blaster today and she bogged down 6th gear pinned, limped her home and put her in the garage pissed. Calmed down after a few beers started tearing her down, this is supposed to be a "stock" 05 blaster. Pulled carb.... seemed normal. Pulled reed cage and thought, this ain't right

That's not a stock blaster reed cage, or stock reeds. Started getting all excited, looked in the intake and seen this..

Don't look stock to me...........

 

[hudack]

thats not stock if you felt like tearing it down i would say some pictures of the exhaust port and transfers!!!

 

[Country Blaster]

It's the weekend..You want pics I'm up for the project, I will provide pics. Just don't understand, bought it from an old guy clear title in hand...... Why lie about whats done to the machine :-/

 

[hudack]

might just be a clean up of all the casting flaws

 

[Country Blaster]

Guy that I bought it off said he was the original owner, never questioned it till this. What reed cage is that anyway??? Looks nothing like any blaster I've seen.......

 

[super noober]

Guy that I bought it off said he was the original owner, never questioned it till this. What reed cage is that anyway??? Looks nothing like any blaster I've seen.......

is it a RAD valve? whats the front look like? looks like carbon dual stage reeds, probally boyesen.

 

[98blaster+4]

before you go too much further, check the jet sizes. hopefully whoever ported that thing had the jetting right too. good score. i guess if your gonna get lied to that the better way of having it. not the other way around"i got a ported and polished 240 kit on this thing".....those guys suck

 

[Larry's Shee]

That's more than just a clean up, IMHO.

 

[roadkill]

the only problem is if it is fully ported and you get used to the power and want more you cant get it ported since it already is

 

[Country Blaster]

Front of reed cage, tore into the carb and found a 280 main jet. Getting ready to pull the head and look inside.

 

[cole454]

Thats no stock reed cage.

 

[1995blaster]

true that lets see a pic of the intake boot

 

[super noober]

i belive thats a old FMF ram valve i think they called it, basically it is a stock cage performance wise

 

[UncagedShadow]

That port job doesnt look too bad though. HAs to be some what better than stock.

 

[Country Blaster]

Pulled the head, looks normal to me?

 

[1995blaster]

ya that hasnt been shaved. pull the cyl off

 

[sicivicdude]

The head looks stock. You would have to measure it to see if it has been shaved (lowered to raise the compression) but the quench area and center of the combustion chamber look stock.

 

[hudack]

well since you have the head off how about some pictures of the exhaust port???

 

[Country Blaster]

Here they are..........

And here is a pic of something written on the cylinder I cant make out.

 

[hudack]

yeah the tranfers still have alot of casting flaws looks like someone took a dremal or something to them but didnt clean out everything and the exhaust port doesnt look like it was touched