Pissed off, Need help

[darealblaster]

Ok guys, so i started up the Blaster, was hard to start, and then it didnt rev much. So i changed the gas, put in a new plug and it fired up fast, so i let it warm and when i go to ride it, it just doesnt rev fast, like if it had a rich jetting, but before it ran great with this jetting, so i leaned it a bit and same thing, only this time it has power at top end but i have to keep it really rev and sometimes it kinda loses power like it wants to turn off but then goes back on the revs.

I was thinking, this all happened after i started using Yamalube in the oil injection, can the oil cause this problem??

And also, in one of the runs it rev to the sky so i turned it off and it made a pop sound out the exhaust, but started back up and didnt do it again...PLease help me before i burn this piece of sh*t to the ground

 

[super noober]

sounds just like tors or parking brake problems but yours are removed right?

 

[brandoz28]

sounds like an air leak if its revving to the sky.


and is you ebrake still there?

 

[darealblaster]

sounds just like tors or parking brake problems but yours are removed right?

parking brake isnt on and it isnt that cuz i know how it is when the parking brake is on, and TORS are on, but its not like it bogs, it revs, i just have to get on the gas real slowly so the revs pick up, if i get on it fast it takes like 3-5 seconds to rev up how it should be. If it were TORS it wouldnt rev to the top at all and it idles fine

 

[darealblaster]

sounds like an air leak if its revving to the sky.


and is you ebrake still there?

AInt air leak, only did it one time, if it were air leak it would rev to the sky all the time

 

[brandoz28]

good fuel flow from the petcock? what's the float look like?

 

[super noober]

parking brake isnt on and it isnt that cuz i know how it is when the parking brake is on, and TORS are on, but its not like it bogs, it revs, i just have to get on the gas real slowly so the revs pick up, if i get on it fast it takes like 3-5 seconds to rev up how it should be. If it were TORS it wouldnt rev to the top at all and it idles fine

when my tors was bad it never wouldnt rev up i was having different kind of revving issues, it was really weird. removed the tors and problem solved. i cant think what else could cause that except mabey a cracked spark plug boot or coil wire mabey.

 

[darealblaster]

when my tors was bad it never wouldnt rev up i was having different kind of revving issues, it was really weird. removed the tors and problem solved. i cant think what else could cause that except mabey a cracked spark plug boot or coil wire mabey.

Yep good fuel flow and float its good. Later if i dont go riding on the raptor, im gonna take a video of how it is so you guys see whats it doing, hard to explain.

Could be TORS, but i hope it aint, cuz removing it on the 03+ is freaking hell

 

[brandoz28]

its not too bad, royalt posted how he did his, its clean and easy his way

 

[super noober]

Yep good fuel flow and float its good. Later if i dont go riding on the raptor, im gonna take a video of how it is so you guys see whats it doing, hard to explain.

Could be TORS, but i hope it aint, cuz removing it on the 03+ is freaking hell

nah dude, my motor is a 04 and removing the tors was easy as can be.

 

[darealblaster]

OK, heres the deal, i went out to record how it was doing, i start it up, let it idle and go grab something and the suddenly revs like if i had the idle really high, i go and turn it off, and start it up, start running it and guess what....It fixed itself, was pulling really nice and hard, but then i let it idle and start hearing it sound wierd.

So i recorded it and uploading to youtube now, will be posting it in like 13 minutes when its done, stay tune

 

[Blasterdude27]

Could be TORS, but i hope it aint, cuz removing it on the 03+ is freaking hell

Naa man its easy. You just snip the wires going to the throttle cable and tie them together, then unplug the carb. Piece of cake.

 

[darealblaster]

OK, heres the deal, i went out to record how it was doing, i start it up, let it idle and go grab something and the suddenly revs like if i had the idle really high, i go and turn it off, and start it up, start running it and guess what....It fixed itself, was pulling really nice and hard, but then i let it idle and start hearing it sound wierd.

So i recorded it and uploading to youtube now, will be posting it in like 13 minutes when its done, stay tune

 

[1bad442]

sure sounds like a big air leak with that hanging idle

 

[1bad442]

cut the 2 wires going to the tors handle bar switch and connect them and unplug the carb tors switch if that doesnt solve the problem i would def do a leak down test . actually id do a leak down test anyways if it was mine

 

[darealblaster]

cut the 2 wires going to the tors handle bar switch and connect them and unplug the carb tors switch if that doesnt solve the problem i would def do a leak down test . actually id do a leak down test anyways if it was mine

OK, i made one fast, but didnt found anything, when i get the chance,maybe in the weekend,got alot of work, ill spread soapy water all over the dam thing and see what happens, i wanna narrows it down to the least possible things cuz dont wanna remove TORS if it isnt the problem

 

[1bad442]

OK, i made one fast, but didnt found anything, when i get the chance,maybe in the weekend,got alot of work, ill spread soapy water all over the dam thing and see what happens, i wanna narrows it down to the least possible things cuz dont wanna remove TORS if it isnt the problem

just remove the tors, it might not be the problem now but it will be at some point thats a given.

 

[LOCSTA]

The TORS sucks anyway. Just remove it.

 

[royalt67]

Have you cleaned the carb out? The intermittent nature of it sounds like crap floating around in the bowl.