Pipe is "drooling"

[MasterBlaster55]

I got a fmf fatty with a turbinecore 2 on my blaster, Im a salesman at a local motorcycle shop, but when it comes to mechanical stuff im pretty retarded so i got my service guys to install it and jet it for me...Ive had it on for about a month, and where the pipe is attached to the engine with springs there is a wet black residue around it...if i ride i get these black spots all around my ankles from this stuff coming out...also when i rev the engine it kind of pushes the pipe away just a little then it snaps back...just wondering if this is normal

 

[blaster01]

ummmm no its not normal.....maybe ur flange is too small..my flange for my procircuit is hard to get in..just have to hammer it with the palm of my hand

 

[Ready2rev]

might need a new exhaust gasket.

 

[gonzo]

come on why would that be normal seal the pipe up after you clean that crap out of there with 100% SILICONE (the orange stuff) and put some new springs on go down 1 size on the pilot and maybe raise the clip 1 notch, then go back and kick that mech. in the nut bag.

 

[MasterBlaster55]

so how do i go about getting a bigger flange

 

[blaster01]

order one

stupid 15 letters thing

 

[MasterBlaster55]

so will going down 1 on the pilot and raising the clip lean it out a bit...my spark plug is BLACK after only a little bit of riding

 

[specialized7]

shes rich then, run it wide open then shut the thing off and check the plug

 

[1997blaster]

damn if its rich then you need to fire the people who jetted it im 15 and can do it right

 

[samolia]

so will going down 1 on the pilot and raising the clip lean it out a bit...my spark plug is BLACK after only a little bit of riding

yeah it will lean it out but if it is still running fine even with the plug like that i would just run it..
alot of people run theres a little rich just for those hot days

 

[super noober]

yeah it will lean it out but if it is still running fine even with the plug like that i would just run it..
alot of people run theres a little rich just for those hot days

i agree with that^^^^^ i like to just be just a touch on the rich side. for those special occasions when beating the balls off the quad is needed.

 

[MasterBlaster55]

i agree with that^^^^^ i like to just be just a touch on the rich side. for those special occasions when beating the balls off the quad is needed.

Yeah it runs Awesome exept for my other post [URL="http://www.blasterforum.com/engine-13/oil-light-17173/[/URL]

 

[BigBlasterd]

try ordering a tighter spring LOL

 

[danyoung582]

i had the same problem at one time, buy a new exhaust gasket, and get a ring that goes around the exhaust where it slides onto the motor, works good.