Parking break bypass?

[Bmarm]

Good evening,
Is there anyone who can give me the link or post up the directions to bypassing the parking break lever? I have a 06 blaster special edition. Photos would be helpful if you have them. Thanks, Bryson

 

[super noober]

you just take it off and voilla, done lol. I:I

 

[royalt67]

Physically or electrically? If for some reason you are messing with/removing the parking brake, then you will want to unplug the PB switch. Follow the wires down from the lever and unplug it near the steering stem. Not doing this will cause it not to rev above idle.

 

[Braaaptor]

Physically or electrically? If for some reason you are messing with/removing the parking brake, then you will want to unplug the PB switch. Follow the wires down from the lever and unplug it near the steering stem. Not doing this will cause it not to rev above idle.

Once this is done, just remove the cable from the bars and take the actuator assembly off the rear brake caliper. It is held on with two (6mm, I think) Allen bolts. You can buy a parking brake block-off plate from places all over the Web to cover up the 'hole' left behind and keep dirt out.

 

[royalt67]

Once this is done, just remove the cable from the bars and take the actuator assembly off the rear brake caliper. It is held on with two (6mm, I think) Allen bolts. You can buy a parking brake block-off plate from places all over the Web to cover up the 'hole' left behind and keep dirt out.

But don't take of the lever on the caliper until you have a blockoff plate.