oil what?????

blastblast

New Member
May 20, 2012
42
0
0
talladega al
OK got a nother question what is the box looking thing.on top of the Carb with 2 wires going to it, and what's this oil injection,I thought that you just mixed the gas and oil in a can.if I just mix the gas before I put in in the tank will it hurt anything. I have no clue about all this
 
no, thats the TORS unit (throttle override)
do you have a tank under your seat on the left(if your sitting on it)? if so, you shouldnt put mixed gas in it. theres all kinds of thread to do a oil injection delete. use the seach tab!
 
OK got a nother question what is the box looking thing.on top of the Carb with 2 wires going to it, and what's this oil injection,I thought that you just mixed the gas and oil in a can.if I just mix the gas before I put in in the tank will it hurt anything. I have no clue about all this

The pos on top of the carb is the TORS look it up, and are the wires on your oil box hooked up? Or do you know If you have oil injector block off kit? Look that up on here 2
 
There is no tank but the gas tank on this one.I got the quad blown up it had 30 lbs if compression and when I took it apart the piston was f###ed up bad so I didn't know if that might have had something to do with it or not.
 
There is no tank but the gas tank on this one.I got the quad blown up it had 30 lbs if compression and when I took it apart the piston was f###ed up bad so I didn't know if that might have had something to do with it or not.

maybe wrong mix ratio? who knows. its in your hands now so make sure the oil injection is deleted properly and mix you fuel 32:1 with a Good quality oil!
 
There is no tank but the gas tank on this one.I got the quad blown up it had 30 lbs if compression and when I took it apart the piston was f###ed up bad so I didn't know if that might have had something to do with it or not.

It would if the port on the side of the carb is not blocked off.
 
Ok thinks for the help.what are some of the best ways to keep these motors from blowing,I got a baby on the way so when I get this one fixed it's got to last me for a good long time.
 
Ok thinks for the help.what are some of the best ways to keep these motors from blowing,I got a baby on the way so when I get this one fixed it's got to last me for a good long time.
air leaks and jetting are killers!!! get yourself a good leak tester (slickerthanyou sells them on here Cheap) and read up on jetting and how to do a plug chop. that and maintenance.
 
just make sure it was done correctly! with all the ports on the engine and carb are sealed proper. once thats done, mix your fuel 32:1. and youre good. oh, Welcome to the forum man!!! i forgot!
 
Check to make sure the little white gear was removed from inside the clutch cover too...that goes to the oil injection motor.