i have a 2001 blaster and just had it bored .20 over and replaced the float, needle and seat in the carb, i also have a fmf silencer on it. ever since i put it back together it will not run right i had to take the air box lid off and it ran good for about an hour and then just stalled and not wont run. it will start if i have the throttle floored and will only stay running when its floored but doesn't run right and as soon as i let off the gas i bogs right out
and it only has 60lbs of compression! with a brand new piston gaskets rings and .20 over
and it only has 60lbs of compression! with a brand new piston gaskets rings and .20 over