Ken Oconner redesigned head

[Whitty21]

this is a stock head redesigned by ken. barely used it, maybe 5 minutes before the bottom end went, since i am buying a whole new motor, i dont need it anymore. it is painted gold.

this is the only pic i got yet, besides the one in my sig

shoot me a reasonable price by pm

 

[Surfrjag]

has the head been milled?

 

[sheeblast]

ya whitty, should have came more info on the redesigning of it.
but it he means that the head has been cut.

 

[Awk08]

ya whitty, should have came more info on the redesigning of it.
but it he means that the head has been cut.

and ken reshapes the dome also

 

[Whitty21]

^^^^ yep, and its stock bore an stroke

 

[mmajay]

^^^^ yep, and its stock bore an stroke

Was going to PM ya but i need one for a +3 mm stock bore.

 

[sc0r1a]

show a picture of the underside

 

[scotj77]

probably looks something like this but with the squish band shave more bc this is for a 3 mil stroker done by ken

 

[Whitty21]

this is the pic of kens site, looks exactly like this

 

[scotj77]

ok the squish band is non exsistant. didn't know ken took the stock stroke that far down. have to admit yours looks cooler.

 

[mmajay]

ok the squish band is non exsistant. didn't know ken took the stock stroke that far down. have to admit yours looks cooler.

Yea, I never saw one taken that far down. Very interesting and nice work. Be a good buy if the price is right and you run stock stroke.

 

[Whitty21]

the little bit i rode with this the power increase was ridiculous, when i got it together at 1am half in the bag i almost filpped it through gears 1-3, this thing is some serious power increas and ken does really nice work

 

[Triple_B]

man.... i want it bad..... but im saving for other things. if u dont sell it within a week, i might be interested.

 

[OConnor Racing]

Here's why they look different, scotj77 has a head for a 3mm stroker without the base plate and Whitty21 has a head for a stock stroke. Whitty's head will work on stock stroke engines.

 

[Whitty21]

thanks for clearing things up ken

 

[blasterfreek30]

this is the pic of kens site, looks exactly like this

just remember that anyone who buys this MUST remember to shave down the rubber vibration blocks that go into the fins.....if it is not cut down, u will end up with a severe airleak

 

[Whitty21]

yep, thanks freek......

 

[Whitty21]

sale pending...............

 

[Whitty21]

consider it sold, getting everything ready to ship

 

[Whitty21]

back for sale, due to the fact that someones wife gave them a bad ass b-day,

lets see some buyers