I need headlights and a tail/brake light

[99LRDblaster]

Any suggestions? :-/

I wouldn't mind going for a Bansheesque dual light setup, but I need a tail AND brake light. I have the original tail light but I never hooked it up, so I'm just assuming it's just a tail light and not a brake light. When I go out with the buds and go down to Wayne, I can never go night ride with them and even with the stock lights, I probably wouldn't, because brake lights play critical importance when we are going through trails at speed. Did the newer body style blasters have a brake light? I'm all ears on suggestions. I:I

 

[Busted Warrior]

If you have front hydros you can use this Tusk Hydraulic Brake Switch Nissin Brakes | Rocky Mountain ATV/MC Put that in in the master cyl or in the T fitting for the front break lines and wire it up to a taillight. I will be doing this once I get some x-tra fundage.

 

[Awk08]

just throwin out the few options i have used/considered

i don't think the 03+ blasters had brake lights ???
but i just got a yfz front brake lever/reservoir and it has a brake light switch built in, i'm gonna wire that thru a micro switch banjo bolt
(available on ebay) on the rear master cylinder, and hook it into my "led" taillights
so both brakes will operate it
which i now have in a bracket since i eliminated my airbox for the cfm one now,
i have also seen gsxr rear tail/brake lights on ebay that look pretty cool.....
smoked lens and led's for tail and brake lights for around $30

heres a pic of my old led setup, amazingly bright at night.................

 

[99LRDblaster]

Hmmm I might have to do that hydraulic brake upgrade afterall. Interesting setups and ideas. I'll admit I don't have the first clue about most of the electrical and lighting stuff on the blaster or other quads.

 

[Awk08]

lighting circuts are easy on the blaster, just follow the diagram in the downloadable manual
and i have also played around with the gsxr brake switches, which i have a few of laying around, trying to adapt them to a stock pedal, but they are a pull type, and need to be mounted above the pedal, which interfered with the kicker, so i scrapped that idea after about a 1/2 hour of looking

 

[B-1]

02-06 blasters have tail/brake light