i got it right??

[89blaster89]

its up 3 on the main jet for no airlid, up 2 for full fmf exhaust, up 1 for 32:1 gas oil mixture? i got that right?

 

[speedemon17]

as long as your going safe at 32:1 your really good i am abou t to try and start mixing mine at 40:1

 

[89blaster89]

as long as your going safe at 32:1 your really good i am abou t to try and start mixing mine at 40:1

i would do 40:1 but its a pita to mix

 

[speedemon17]

not if you have a mixing cup like i do i have 2

 

[borednstreched]

^x2 i have a ratio cup too, greatest thing in the world for a 2stroke.

 

[blasterBruce]

I need a ratio rite !

 

[89blaster89]

yea i now have one, before i didint and it was a pita for anything but 32:1

 

[Awk08]

btw....you do not have that right
there is no set standard for richening your jets, every bike, mod to that bike, and elevation is different, and a plug chop is the only sure way to tell for someone asking these types of questions

 

[89blaster89]

btw....you do not have that right
there is no set standard for richening your jets, every bike, mod to that bike, and elevation is different, and a plug chop is the only sure way to tell for someone asking these types of questions

yes i agree, but that is around what you should start with before a plug chop right??

 

[Budget_Blaster]

PLUG CHOP OR GTFO!!!

Seriously awks right.

 

[Blaaster]

Why mess with the tried, and proven. 40:1 is not enough oil for a motor under 200cc's

Here is some light reading by Gordon Jennings on 2 srtoke oil pre mixes.

http://www.bridgestonemotorcycle.com/documents/oilpremix6.pdf