what's the proper way to remove the axle from the carrier of an 02 blaster? i have the swingarm removed with the axle and carrier installed. i would like to leave the carrier in the arm if possible.
Thanks
David
Thanks
David
if the axle won't come out of the carrier with the nuts removed. take the whole carrier and axle off the quad and slam the left side of the axle down hard repeatedly on a block of wood while holding it by the carrier. it will come loose sooner or later.
If I ever get the %#@&ing sprocket hub off the axle, i can work on the brgs. I have heated to dull red, PB Blastered ,more heat, beat with pipe protector over threads , tried one homemade puller, have new design puller in the works. Hate the thought of spending $20 at auto parts to have it pressed.
Probably take either grinder or cutting torch to brgs because I'm getting so tired of it X( , gotta be ready for Memorial day weekend. I:I Probably won't get swing arm brgs in. Wish I had something bigger than a 2lb hammer. Never force it, get a bigger hammer
what size of wrench to use on the large axle nuts?