I was riding this past weekend and had some issues with my Blaster, after checking the basics I have fuel and spark but low compression. I pulled it behind another quad and it started but wouldn't stay running when the wheels stopped turning, I could feel air coming out from underneath the exhaust manifold. I replaced the gasket, when I had the head off I noticed that the piston was heavily worn to the point that the upper ring is gone. I know dumb question but is this going to prevent it from starting?
HELP!!!
- Thread starter MJenson81
- Start date
absolutly, your going to have to rip the top end off, bore out the cylinder get a new piston kit.
But if it were me, i would put new rings on and try it, if it blows up wel you just gonna have to rebuild it.
But if it were me, i would put new rings on and try it, if it blows up wel you just gonna have to rebuild it.
yeah, time for a rebuild, might as well put the 240 kit in it! or port and polish while you have it bored.
yes sir it is time for a rebuild. if you have the extra cash do what smoker says and add a lil more pep to it.
The ring is gone!=)) Wow, yeah its time for a top end job man. As said before the power is in the porting!
