Help with 34mm flat slide

[FordMan7072]

I just got a new blaster and I'm having a very hard time getting a throttle cable for it. Its got a mikiuni 34mm flat slide it had a twist throttle on it and I put a warrior thumb on it but it has a really stiff spot when first giving it gas. Any help with what cable or throttle that will work with this Carb?

 

[blasterdemon7]

Make sure your cable is in good condition and is routed so there is no tight bends in it.

 

[Braaaptor]

Make sure your cable is in good condition and is routed so there is no tight bends in it.

x2. Chances are there's a problem with the cable somwhere between the throttle and the carburetor. Check it thoroughly.

The Warrior thumb throttle is almost exactly the same as a stock Blaster throttle, so no worries about fitment issues.

I run a 34mm Mikuni TM carb on my Blaster, and the Motion Pro aftermarket Blaster throttle cable will fit this carb no problem. This cable was originally designed to go on a stock Blaster carb with the TORS cap removed, but it fits the bigger Mikunis, too.