Help me!!!!!!!!

[blasterkiidirl]

my blaster wont rev out by last night it flue but now it wont "braap out" and it does this alot it runs dicky sometime and other times it flysw but it also gets a bit hot imo

it has a fmf sst exhaust v froce reeds and the air box lid removed

i need running prefect by FRIDAY OR IM FUKED I NEED RUNNING FOR MY RACE SUNDAY

 

[super noober]

whats your jetting? did u clean the carb? tors or parking brake still hooked up??

 

[Blaner]

most probably tors or park brake.

take off the hood and unplug the white plug from the park brake. try it out.

if still, have a look at the tors

 

[Prime]

When was the last time you washed it? You could have sprayed the CDI box and ruined that. I did it...

 

[Painthehouse]

Reeds, reeds, reeds. Pull them. I had this exact problem. Flew all day then it wouldn't rev more than half. My reeds were loose and dangling opened. Loctite them.

 

[blasterkiidirl]

most probably tors or park brake.

take off the hood and unplug the white plug from the park brake. try it out.

if still, have a look at the tors

hand brake is removed and and so is the switch of the in the tumb throttle

 

[blasterkiidirl]

Reeds, reeds, reeds. Pull them. I had this exact problem. Flew all day then it wouldn't rev more than half. My reeds were loose and dangling opened. Loctite them.

v force reeds dont have screws

 

[super noober]

hand brake is removed and and so is the switch of the in the tumb throttle

with a 03+ u need to cut the wires at the carb and twist them together to remove the tors

 

[Painthehouse]

Could be chipped or broken.

 

[Blaner]

if brake is removed, you need to splice the toors wires as mentioned. otherwise check your reeds, also as mentioned, dont just assume they are fine!

 

[blasterkiidirl]

if brake is removed, you need to splice the toors wires as mentioned. otherwise check your reeds, also as mentioned, dont just assume they are fine!

il try dat so



The message you have entered is too short. Please lengthen your message to at least 15 characters.

 

[blasterkiidirl]

i jst tool it 4 a spin and it went ok but then is was a bit funny again dere is no wires the "TORS BRINK THINGY" ????? and i fond a crack on the in take boot ????

DIS THING IS DOING MY HEAD IN i mean if i wanted a biotch i would have bought a dog

 

[super noober]

i jst tool it 4 a spin and it went ok but then is was a bit funny again dere is no wires the "TORS BRINK THINGY" ????? and i fond a crack on the in take boot ????

DIS THING IS DOING MY HEAD IN i mean if i wanted a biotch i would have bought a dog

ok the cracked intake is not good but probally not the issue but you definately want to replace that so u dont suck air and lean it out.. ok here is what i did on my '04 to remove the tors, follow the wires from the thumb throttle to the black box, cut the 2 wires down by the box and twist them together then do the same thing with the wires coming out of the carb

 

[blasterkiidirl]

ok the cracked intake is not good but probally not the issue but you definately want to replace that so u dont suck air and lean it out.. ok here is what i did on my '04 to remove the tors, follow the wires from the thumb throttle to the black box, cut the 2 wires down by the box and twist them together then do the same thing with the wires coming out of the carb

there is no wier coming out of the carb :-/

 

[Prime]

there is no wier coming out of the carb :-/

Look for the black and yellow wires coming out of the throttle body(the part that screws to the top of the carb)

 

[blasterkiidirl]

its the reeds i can watch tv throught them lol rep for every i who helped me out on this thread