handelbar risers?

[yzrider]

any of u use handlebar risers like these?
Tusk Handlebar Riser Kit 7/8" Bars Motorcycle ATV NEW : eBay Motors (item 290401499263 end time Mar-12-10 19:06:17 PST)
i was thinkin about getting some to raise my bars cause i'm like 5'11-6' tall, idk, havn't been measured in a while and the stock setup seems short, also i'm gonna race and i would like a taller setup for that too. so what would i need to raise it, they raise it 1.2 inches so would i need new cables?

 

[yzrider]

bump!!!!!
15151515151515151515151515151515151515151515151515!!!!!!!!!!

 

[yb200]

just get ya another set of bar clamps and flip them over put the bars on those and put the other clamps on top

 

[DReeds]

yup yuppp got them on the raptor,nice and strongggg and the height helps.

 

[yzrider]

will i need longer cables, or will the stockers be long enough?

 

[blaster01]

the stockers would be long enough i would think....when i used a set of flipped top clamps it worked and then i got an SMS +2 stem and they still worked.....

 

[brandoz28]

if you just use another set of risers stockers are fine, i just got done doing it! you need longer bolts too btw

 

[yzrider]

cool, thanx dudes, rep to all. gonna save up and get some of these. maybe some +2's

 

[yzrider]

i'll give blaster01 some rep when i spread some more round, it won't et me right now.

 

[2stroke4ever]

if your alright with the bend then i'd get risers, but if the bend doesn't fit your needs for aggressive racing maybe look into different bars that are set up a little higher, not to many racers run the stockers, you wreck good the stockers are prolly gonna me gone either way, just an idea

 

[yzrider]

yeah, i'd think about that but i'm short for cash.....

 

[yzrider]

well, i'm torn, i can't decide wether to buy risers or fly racing handlebars, i was looking at powermadd risers, the adjustable ones, that u can adjust the angle.

 

[dygz21]

I have a banshee stem and it made the blaster sooo much more fun to ride.. doesn't feel like I am on a kids fourwheeler anymore.

 

[yzrider]

i'm thinkin either a banshee stem or some risers, depends on which i can find on egay for cheaper

 

[yzrider]

i'm just gonna do freeks double clamp flip thing, in the diys, if anybody has the clamps, tell me, i'm lookin for two maybe, my best offer is 10 bux for both

 

[DReeds]

well, i'm torn, i can't decide wether to buy risers or fly racing handlebars, i was looking at powermadd risers, the adjustable ones, that u can adjust the angle.

im using 1-1.5 inch risers,+2 stem andddd ATV sportbend Tusk bars...LOVEEEEE it on the raptor...go with the risers bro.

 

[yzrider]

i'm just gonna build my own cheap 2-3"risers with the stock top clamps, they should workgreat, not shure wether to triple up the clamps, or just go double.

 

[yzrider]

i'm gonna wait till my b day and ask for some fasst flex bars, haha, that will be awesome.