First blaster ever
- Thread starter brandoz28
- Start date
finished up one of the shocks today, gonna finish the other one here in a little bit, and then they'll go to the dealer this week to get some nitrogen put in them. i think my gf is going back around my parent's place wednesday so hopefully she can get my crank installer and yamabond. then the next week is finals, and by the end of that i'll be ready to get riding!
looking really good man!!!
btw...u need to change the stock handbar...
good luck n waiting see more pics
btw...u need to change the stock handbar...
good luck n waiting see more pics
well, since i have them apart i'm going to clean up the cases a little bit since they've got something on them that the parts washer and brush didnt get last time....so it'll get to meet the dremel and a wire wheel.
i'm getting some billet pieces from a member on here, got a rear brake reservoir cover, and now i'm getting a billet gas cap too!
plan is to be putting it together 2 weeks from now...maybe even being back on and riding. i can't wait to ride it with the new tires, axle, spacers, and swinger
i'm getting some billet pieces from a member on here, got a rear brake reservoir cover, and now i'm getting a billet gas cap too!
plan is to be putting it together 2 weeks from now...maybe even being back on and riding. i can't wait to ride it with the new tires, axle, spacers, and swinger
looks like i'll be getting the motor back together this afternoon after running out to yamaha to get a base gasket and stator side crank seal. before i assemble it i will be doing the DIY +4 timing mod. next weekend i should have this thing back in the chassis and be hitting some trails and stuff to get a real feel for how the chassis is gonna work
I usually take the local dealer out of the loop. He usually just deals disappointment.
World of Powersports' Yamaha ATV Parts Finder
World of Powersports' Yamaha ATV Parts Finder
wellllllllllllllllllllllllllllllllllllllllllllllllllllllllllll
started a new job so the money for blaster parts will be coming in, but i'm working a lot of weekends so no time to ride since i have to drive an hour each way (at least) to be able to ride. pretty big bummer. but i'll be trying to get the motor put together this weekend and then figure out when i'm going to be able to marry it back to the chassis. then figure out where to ride this thing so i can actually enjoy it!
next on the list is a set of a arms, get the front hydro's on, then just little things here and there, this winter i'm going to be pulling it all the way back down to the frame to gusset and repaint. not too happy with how it came out
started a new job so the money for blaster parts will be coming in, but i'm working a lot of weekends so no time to ride since i have to drive an hour each way (at least) to be able to ride. pretty big bummer. but i'll be trying to get the motor put together this weekend and then figure out when i'm going to be able to marry it back to the chassis. then figure out where to ride this thing so i can actually enjoy it!
next on the list is a set of a arms, get the front hydro's on, then just little things here and there, this winter i'm going to be pulling it all the way back down to the frame to gusset and repaint. not too happy with how it came out
Looking good man... First time i checked out your build... How did the case splitting go? I did a warrior and it was a PITA... Is that a A/M axle or you polish the stock one? Looks good.
harescrambles are badass wen i raced my blaster in one i never went out of 3rd gear cause it was so muddy. but i blew my oil seals. be careful if u race harescrambles though cause two people that were racing gncc all ready got killed i raced with one of them in youth a couple times. RIP ryan earley 763
Glad to hear things are coming along bro, getting closer!!!
Hope you are back together soon, post some pics of the works rebuild when ya can, looking forward to checking it out.
Hope you are back together soon, post some pics of the works rebuild when ya can, looking forward to checking it out.
well, after a little bit of a blasterforum intervention, i got the case halves back together, and the trans seems to work smoother than it ever did last time. things are looking up.
now i gotta go get some new seals that i messed up and a couple c clips that i wasn't so nice to while tearing it apart
now i gotta go get some new seals that i messed up and a couple c clips that i wasn't so nice to while tearing it apart
Similar threads
