Got stock motor ,Fmf full sst exhaust,boysen power reeds, oil injection block off, running 32:1. Did a compression test and it read 160. Now my Manual says between 140 & 160. I have read some threads that only modified heads will read higher than 130. Does any body have some insight on this?
Compression?
- Thread starter jaddict
- Start date
How many times should you kick it. The manual says kick it till the guage stops. Have seen some videos that only kick it 5 times.
I know if you bore it you will get some more compression. i deffinitly noticed when i kick my 03 which is bored .010 over then my 96 on stock bore which is around 125 psi and has about half a tank of gas on it. not sure what my 03 reads but 120 thorugh 130 should be good for stock bore and or head.
Then congratulations sir you have a modded head and probably one hell of a beast on your hands!I:I Thats definately a very healthy motor check it over and catch anything that may sacrifice any health or longevity in the engine.
My g/f's blaster is at 137psi with a .050 wiseco,boysen reeds,fmf gnarly and its a terror for what it is so im sure yours is beastly bro.
