Went to break in the bike last night and noticed the clutch wont disengage. Took the cover off today and checked all the plates and noticed that with the plates off the inner basket would not spin. Took the primary nut off and as soon as it broke loose the inner basket spun fine. Tighened it back down to 58lbs and again everthing was solid. I looked through the manual to ensure that all the parts where in the correct order and it looks correct. starting behind outter basket there is a thick smoother center washer, then a paper thin washer, the outter basket, a thick 'gear center' washer, the nut lock washer and then the nut.
Am I doing something wrong here? I spun the back tire as I tighened down the nut and the inner basket quickly stops spinning and becomes one with the outter. Help!
Am I doing something wrong here? I spun the back tire as I tighened down the nut and the inner basket quickly stops spinning and becomes one with the outter. Help!