Can someone get me in the Jetting Ball Park

[seitz729]

Buttoning up my project Blaster. Replaced the silencer from the full Trinity system with a Pro Circuit Silencer/SA. I plan on using a Uni filter. The air box lid has been removed. I'm at sea level here in So. Cal. Any jetting suggestions to get me started would be greatly appreciated.

 

[motoman159]

280 maybe? im not sure ill wait for awk to just in here im at sea level with fmf vf3 uni and diy port at 280

 

[Triple_B]

I say 290, 300, 310, 320 is where it should be about.

 

[EZRider76]

Buttoning up my project Blaster. Replaced the silencer from the full Trinity system with a Pro Circuit Silencer/SA. I plan on using a Uni filter. The air box lid has been removed. I'm at sea level here in So. Cal. Any jetting suggestions to get me started would be greatly appreciated.

What carb? Mikuni? Keihine? OKO? And what size carb? That will make a difference.

 

[motoman159]

I say 290, 300, 310, 320 is where it should be about.

just couldnt say 280 could ya?

 

[Awk08]

I say 290, 300, 310, 320 is where it should be about.

start with those, or slightly larger and work down doing plug chops with each
i think i remember running a 330 in my stock carb, with my trinity/cfm box/uni filter,
before my porting/34mm pj