Camber And Toe Problem!!

[Orleymtnez]

Ok guys so My blaster Has A Camber in the right front wheel (facing it from the front of the bike) It Looks Like This []=V=// Also the same front wheel is leaning out it looks like this (looking at it from the top)

\\=^=[]
....[]
[]===[]

Now adjusted the tie rod so its kinda straight but its almost at the end of the thread on both ends i think thats kinda dangerous isnt it?? i cant visually see anything bent so do i have to replace the entire A arm please help!!!

 

[Whitty21]

sounds like a bent a-arm or spindle to me

 

[Devilman910]

sounds like a bent a-arm or spindle to me

I agree, you can adjust the tires in and out with the tie rods but the tilt is fixed between the upper and lower a-arms

 

[blasterboy20xx]

Actual pics would help alot...

 

[stephen]

Bend spindle! There is no short cut take them of and check them, against each other

 

[NEONNIGHT34609]

if its a lower a arm i have one i will sell ya CHEAP

 

[Blaner]

yes, either spindle or a arm.